Close
0%
0%

Le Roux Bodenstein

Following
Send a private message
Similar accounts worth following
2 Followers
22 Following
1 Projects
le-roux-bodenstein
Send a private message

This user joined on 03/13/2015.

6k
28
3
28
A little smart hardware terminal for use with REPLs like MicroPython in the form of a Feather Wing.
Project Owner Contributor

DumbDumb

le-roux-bodensteinLe Roux Bodenstein

346.6k
2.8k
110
1.7k
A printable robot arm, a little bigger than the usual hobby servo once.
Project Owner Contributor

3D Printable Robot Arm

andreas-hoelldorferAndreas Hoelldorfer

236.9k
2.6k
62
1k
pcb mill built from garbage using basic hand tools and little money
Project Owner Contributor

PCB mill for under $10

shlonkinshlonkin

123.8k
1,632.5k
74
2.6k
Follow for the 'Hacklet' and latest news about hackaday.io
Project Owner Contributor

Hackaday.io Project

lutetiumLutetium

109.8k
673
28
230
A budget 3D printer that is easy to build with basic tools. A closed loop system using optical mice is to be used for greater accuracy.
Project Owner Contributor

Cheap and Easy to Build 3D Printer

sugapesSugapes

106.3k
1k
108
746
The WiPhone project is an open source mobile IP phone. WiPhone is intended to be hackable, modular, cheap, and open, while remaining usable.
Project Owner Contributor

ESP32 WiPhone

stupidstupid

91.1k
1.1k
54
261
How I did to remotely control and monitor my home made Off-grid Photo voltaic System
Project Owner Contributor

My Off-grid Solar System Monitoring

michel-kuenemannMichel Kuenemann

63.8k
12.2k
33
293
An affordable Arduino controlled multipurpose laser exposing device. Use it for SLA Printers, PCB Exposing, Laser Harp etc.
Project Owner Contributor

OpenExposer

mario-lukasMario Lukas

56.3k
6.7k
19
239
A computer running the BASIC programming language, generating composite video and reading PS/2 keyboard input using a single AVR.
Project Owner Contributor

Single Chip AVR BASIC Computer

danDan

55k
247
9
181
A simple calendar made with e-ink display and stm32 microcontroller.
Project Owner Contributor

NekoCal - an E-Ink Calendar

wenting-zhangWenting Zhang

51.5k
413
17
340
A mostly printed digital microscope powered by a Rasperry Pi Zero W
Project Owner Contributor

Pi Microscope

braunscncBraunsCNC

50.5k
198
13
115
Make a board to interface the Raspberry Pi with a surplus Kindle screen. The smaller and cheaper, the better
Project Owner Contributor

6 inch Pi E-ink display

j0z0r-pwn4tr0nj0z0r pwn4tr0n

50.3k
787
50
430
Moti is a smart servo that simplifies the design of intricate robots.
Project Owner Contributor

Moti, a smart servo

nicholas-stedmanNicholas Stedman

46.3k
222
36
184
ESPlay Micro is an ESP32 Based emulator device for playing retro games, able to play classic games NES, GB, GBC, SMS, Game Gear and more.
Project Owner Contributor

ESPlay Micro

fuji-pebriFuji Pebri

45.6k
1.8k
82
505
RepRap HELIOS is a highly printable SCARA 3D printer. It has an outrageous print area and can print on almost any flat surface.
Project Owner Contributor

RepRap HELIOS

nicholas-sewardNicholas Seward

43.8k
373
27
375
Pocket sized ESP32 display board with 180µW Always On Display and Gyro Controls
Project Owner Contributor

Low Power ESP32 Handheld

maxkMax.K

36.5k
293
34
209
A 75 watt MPPT Solar Charger with tons of features. Efficiency > 97%, USB interface, data logging, 2 USB charging ports and much more...
Project Owner Contributor

High Efficiency MPPT Solar Charger

lukas-fsslerLukas Fässler

35.8k
2.7k
27
229
USB hid keyboard ... etc. for Raspberry PI
Project Owner Contributor

mini (Pi)QWERTY USB keyboard

bobriciusbobricius

35.2k
333
33
286
A 1 square inch PCB module with 2 tiny solar cells, a highly efficient Li-Ion charger and with 3.3V and 1.8V output
Project Owner Contributor

Tiny Solar Energy Module (TSEM)

jasper-sikkenJasper Sikken

View all

Share this profile

Share

Bits

Kris Winer wrote 10/31/2019 at 23:17 • point

Thanks for following my STM32L4S9 Development Board with External SRAM project!

  Are you sure? yes | no

Dennis wrote 07/04/2018 at 14:25 • point

Hi, Thanks for liking and following my project Indoor Light Charged Power Supply.

  Are you sure? yes | no

Patrick Van Oosterwijck wrote 10/06/2017 at 21:00 • point

Thanks for following my #LiFePO4wered/Pi+  and #LiFePO4wered/9.6V projects!

  Are you sure? yes | no

Send a private message to Le Roux Bodenstein

Become cool instantly

Create your Hackaday.io profile like Le Roux Bodenstein and many others

Report user as inappropriate

You are about to report the user "Le Roux Bodenstein", please tell us the reason.