0%

0%

arturo182

I do some coding, I do some hardware, sometimes I stream at https://youtube.com/arturo182 Follow me on Twitter!

Malmö, Sweden

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 06/03/2016.

Proud member of

My Projects

A footprint and 3d model for KiCad that can be used to get a grasp of the scale of your board.

The KiCad Banana Footprint - For Scale!

A hand-solderable SMD/TH module w/ RP2040 MCU+8MB FLASH, LDO, LiPo charger, reset btn, and Neopixel. Breaks out all GPIO+USB+SWD+BOOTSEL+RST

RP2040 Stamp

A FeatherWing with a LCD, BB Q10 keyboard and a 5-way button.

Keyboard FeatherWing

A 12x12 LED Matrix with Ping Pong ball diffusion, framed in a Ikea Lack table.

Lack Ping Pong LED Matrix

A BB Q10 Keyboard in PMOD format!

BB Q10 Keyboard PMOD

A CircuitPython dev board designed for breadboards! With adjustable voltage rail, multiple GPIOs and a 1.3" 240x240 LCD.

Serpano

View all 26 projects

Projects I Contribute To

We're Going to the 36th Chaos Communication Congress, and You're Coming With Us!

[Hackaday] @ 36C3

Elliot Williams

My Hackerspaces

We are a hackerspace from the lovely Scania region in Sweden.

xil.se

Projects I Like & Follow

A functional glove that lets you use AND FEEL your hands in VR.

LucidGloves: VR Haptic Gloves on a budget

Live-coding an Open-Source Pico Emulator from Scratch

Raspberry Pi Pico Emulator

A very minimal design to break out some common peripherals of the CM4. More a quick demonstration than anything else.

Minimal Raspberry Pi CM 4 Carrier

After three years... Supercon again! And the new badge too!

BADGE FOR SUPERCON.6 / November 2022

DIY Skirt with 120 Neopixel LEDs and motion detection

Neopixel LED Skirt

RGB LEDs Triangular/Hexagonal Pixels Matrix.

RGB HexMatrix | IOT Clock

48 display controllers over three I2C buses; 288 four-digit 18:88 clock displays (25 segments per display); full 8-bit PWM grayscale control

7,200-segment, 1,152-digit 7-seg display

USB hid keyboard ... etc. for Raspberry PI is back in black, more beauty with more features ;)

mini (Pi)QWERTY USB keyboard II.

Modern take on TIL311 and reimagination of #PICTIL optimized for easier production and lower part count

reTIL

Earring with 16 addressable LEDs (WS2812B-2020) and rechargeable coin cell battery.

WS2812B (Neopixel) Earring

Solution do build the simplest/cheapest injection molding press that is capable of 60g+ material injection.

DIY injectionmolding for everybody

Hackaday Europe Biennial

Hackaday Belgrade 2020

Aleksandar Bradic

This is a 3D printed Electromagnetic 7 Segment display. Click Digit

Click Digit - Electromagnetic 3D Printed 7 Segment

GameBug is a pair of breakout boards for everyone who is making his own games.

GameBug

Dimitar Dimitar

Low-cost ECP5 FPGA development board

Pergola: ECP5 dev board

Konrad Beckmann

Battery is dead so the bench supply jumps in

Bench Supply Bluetooth Speaker

Home mesh-network temperature/humidity sensor project.

OpenThread temperature sensor project

addon for the keyboard featherwing by arturo182 / solderparty

Wing Bucket

View all

Bits

Pedro Minatel wrote 06/30/2020 at 08:24

Awesome projects! Thanks for sharing across the community.

Are you sure? yes | no

arturo182 wrote 06/30/2020 at 08:45

Thank you :)

Are you sure? yes | no