0%

0%

Ryan D

An engineer who needs up skill in electronics to continue racing electric motorcycles

UK

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 01/16/2021.

Projects I Like & Follow

A 3D-printed adapter enables the 60 volt mode of the DeWalt Flexvolt batteries.

DeWalt Flexvolt 60v Battery Adapter

How to design your own HAT module including ID EEPROM.

Designing a Raspberry Pi HAT

The 2017 Hackaday Prize

A device that looks like a SciFi device, but it's no fiction. I use it every day to power my circuits, soldering iron and led lamp.

Portable Laboratory Power Supply

Expansion boards are designed to be easy to use in DIY IoT projects, low cost, reliable, saves the pain of cabling bread boards

STM32 Blue pill IoT expansion boards

BlackIce is the fusion of FPGA & ARM - a low cost open source hardware FPGA dev board bound together with innovative open source toolchain

BlackIce - Low Cost Open Hardware FPGA Dev Board

Following the work of https://openservo.org/ , continue development on bringing high quality digital servos for robotics

OpenServo 2.0

Tiny IOT Solution based on Arduino& SIM808 GPS/GPRS

IOT- SIM808 GPS Tracker Based on Arduino

An Arduino-programmable guitar effects pedal

ESP32 Guitar Shield

GaryGru GaryGru

Make a Raspberry Pi replacement using a Cypress Semiconductor Programmable System on a Chip (PSOC 5)

Not Quite Useless Raspberry Pi Replacement

land-boards.com

Open Source Hardware GNU/Linux PowerPC Notebook project

OSHW GNU/Linux PowerPC Notebook

Roberto Innocenti

Hackaday Prize 2019

FiberGrid is a sensor framework for robotics

FiberGrid

YES, naturally my owning MCU has OLED display.

tiny BLE board with OLED

Using the Raspberry Pi to get weather from the internet

Raspberry Pi Weather App

Vaneh Boghosian

Hackaday.io code of conduct

Code of Conduct

A complete closed system within a box for plantation and ecological experiment

AgriFutureHK Food Computer

A CNC machine made using PLA and a common 3d printer. All of the software & electronics are open source or off-the-shelf components.

3D Printed CNC

An uninterruptible power supply for Raspberry Pi that can provide more than an hour of backup power and shutdown the Pi safely.

Power PI: A Smart UPS for the Raspberry Pi

Trying to read data and log data from the OBD-II port in my 2017 Honda Civic using the MCP2515 CAN controller.

Automotive Data Logging over CAN

Ville Tiukuvaara

View all

Bits