Close

Your browser (Internet Explorer) is out of date.

Update your browser for more security, comfort and the best experience on this site.

Update Internet Explorer

Projects Olivier Godfroid likes and follows

4.4k
2.8k
27
A computer built around a Atari 2600 (VCS), with a few nifty upgrades, 6502, 64k + 128bytes ram, coprocessor, 77 is getting a rework
Project Owner Contributor

Super atari 6502 (A "DIY" 2600 hardware clone...)

RobertRobert

27.9k
2.3k
37
I reversed engineered the canbus screen in my Clio and created a bluetooth remote control to listen to webradios without touching my phone.
Project Owner Contributor

Smart car radio

ManuManu

1.9k
1.9k
18
The smallest DIL40 8085-based computer
Project Owner Contributor

SDC_85

gbmgbm

4.7k
1.9k
25
Tiny IOT Solution based on Arduino& SIM808 GPS/GPRS
Project Owner Contributor

IOT- SIM808 GPS Tracker Based on Arduino

MakerfabsMakerfabs

2k
1.9k
4
Audio pre-amp with radio, OSMC on a Raspberry Pi for media handling.
Project Owner Contributor

Multimedia center with DAB/FM radio

Terje IoTerje Io

3.3k
1.8k
21
Open-Source companion robot for teaching and playing
Project Owner Contributor

Rhoby.The Social Robot.

Ilyas AkhmetzyanovIlyas Akhmetzyanov

3.4k
1.8k
14
Basically you can turn regular fishing line and nichrome wire into a linear actuator that can contract much like a human muscle.
Project Owner Contributor

Material Linear-Actuator for Robotics

Brandon T. WoodBrandon T. Wood

53.8k
1.8k
460
An Odrive + steppers based construction, with 5x 3D printed hollow shaft reducers and an internal CAN network.
Project Owner Contributor

Atlas - 6DOF 3D printed universal robot

Damian LickindorfDamian Lickindorf

1.5k
1.5k
1
Commander un relais iot avec ESP-01 via SmartThings
Project Owner Contributor

Relais ESP-01 iot sur SmartThings

Erik TellierErik Tellier

3.8k
1.5k
21
Control your mobile device remotely without using the touch screen
Project Owner Contributor

Tactile Remote Control of a Mobile Device

Kyle ThomasKyle Thomas

1.6k
1.4k
10
Making low power dual channel remote switch for lights.
Project Owner Contributor

LightFox Dual - esp8266+RF dual channel switch

Andrey KupreychikAndrey Kupreychik

7.5k
1k
40
Got printer? Connect to the motors with a Pi, plonk in a cheap scope, and do 2D and 3D scans!
Project Owner Contributor

LadyBug BEEFY: 3D printer motorized microscope

Ahron WayneAhron Wayne

13.2k
817
77
Just for the sake of making it happen, I've designed an open-source TOMU form factor ESP32 design. It fits in a USB Type-A port.
Project Owner Contributor

FEMU - An ESP32 Wi-Fi/Bluetooth board in TOMU form

femtoduinofemtoduino

1.6k
761
2
Driver for the RDA5807M FM radio which allows for new frontends to be swapped in with no backend refactoring required
Project Owner Contributor

RDA5807M FM Radio Driver and Command Interpreter

Ben ShermanBen Sherman

1.2k
701
13
a cost $1, actually even less, solution for Bluetooth 4.1
Project Owner Contributor

<$1 Bluetooth 4.1 Solution

MakerfabsMakerfabs

3.9k
687
26
One Radio to rule them all Wifi, Bluetooth, nRF24l01p, CC2500, A7105, CYRF6936
Project Owner Contributor

Multiprotocol Radio

SpectreSpectre

1.2k
656
5
This project demonstrates how to build a battery powered IoT Wi-Fi button in less than 10 min. This example controls HUE lights over IFTTT.
Project Owner Contributor

IOT WiFi Button (DIY)

SylwesterSylwester

393
393
6
IoT Nixie Clock can be controlled via Arduino Cloud or Amazon Alexa thanks to the Arduino Nano 33 IoT.
Project Owner Contributor

Voice Controlled Nixie Clock - Alexa & IoT Arduino

Marcin SajMarcin Saj

23.9k
383
88
A piezo inkjet printer built from scratch
Project Owner Contributor

DIY Inkjet Printer

Dominik MeffertDominik Meffert

736
306
16
Smart open source robotics project for makers and students. Combines electronics, mechanics and informatics in one system.
Project Owner Contributor

Delta Robot One

Pascal BuergerPascal Buerger

231
223
2
3D printed face shield glasses and a visor that use household plastic/cling/saran wrap instead of hard plastic for those unable to obtain it
Project Owner Contributor

3D Printed Face Shields Using Plastic Wrap

Connor YamadaConnor Yamada

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2021 Hackaday