99 Results for "Q%20%EC%95%88%EC%82%B0%EB%B8%94%EB%9E%99%EC%9E%AD%20CDDC7_C%D0%9EM%20%E2%97%86%EB%B3%B4%EB%84%88%EC%8A%A4%EB%B2%88%ED%98%B8%20B77%E2%97%86%EC%88%98%EC%9B%90%EC%9E%A5%EC%95%88%20%ED%94%84%EB%A1%9C%ED%86%A0%20%EA%B5%AC%EB%A7%A4%E0%B9%8F%ED%86%A0%ED%86%A0%ED%95%AB%ED%94%BD%E2%8F%AC%EC%98%A8%EB%9D%BC%EC%9D%B8%ED%99%A9%EA%B8%88%EC%84%B1%E0%BC%88FX%EB%A7%A4%EB%A7%A4%E2%8B%8D%EC%95%88%EC%82%B0%EB%B8%94%EB%9E%99%EC%9E%AD%EC%95%A0%EC%9A%A9%20thorough/"

Part 1: Flow Cell using a PH gradient
Instructions from Bipolar Membrane Energy Harvester
This flow cell generates electricity by differences in electrode potential in manganese dioxide over a PH gradient, like a fuel cell that uses acids and bases instead of oxygen and fuel. This type of technology, albeit probably with different electrode...

Non-Invasive Alzheimer's Light Therapy Devices
Instructions from Non-Invasive Alzheimer's Light Therapy Devices
Now that all the required circuits are finished, their corresponding programs can be uploaded onto the ESP boards. Code for remote circuit: //#include #include #include #include //#include //#include "Adafruit_MQTT.h" //#include "Adafruit_MQTT_Client.h"...

Frame the Tiny Home Structure
Instructions from 1.8 Billion Homes Powered by Renewable Energy
Please refer to the Assembly Drawing PDF file in the attached documents for detailed manufacturing dimensions and bill of materials. Again, this prototype version is a smaller 20 foot long tiny home, so the drawings can be used as a guide that can be...

Mechanicals
Instructions from Basic Farm Robot 2021
In previous projects we spent a lot of time designing and building the mechanical systems and we really wanted to short cut all the hard work by using a ready made system that could be bought reasonably cheaply 'off the shelf'. We looked at mobility...

Step 9: Capturing faulty component (part) images w/ the built-in OV2640 camera
Instructions from Multi-Model AI-Based Mechanical Anomaly Detector
After setting FireBeetle 2 ESP32-S3 and Beetle ESP32-C3 on the Arduino IDE, I programmed FireBeetle 2 ESP32-S3 to communicate with Beetle ESP32-C3 to obtain the commands transferred by the Android application via serial communication, capture raw image...

Schlieren-Videography
Instructions from Schlieren-Videography
Simple setup, place your camera on a tripod, your Moiré pattern right next to it and focus the camera onto the pattern. 82 cm is a good distance in between the camera and the pattern.For my camera a aperture of f/4 with auto-gain and a shutter of...

3DOF Hexapod (Hexapi)
Instructions from 3DOF Hexapod (Hexapi)
To hook up the ssc-32U to the PI, you will need a SparkFun Voltage Level Translator or something similar. The ssc has a logic level of 5 volts, the PI level is 3.3v. So you would hook the low side power/ground to the PI. For the ssc side, I only needed...

Easy Build my own useful Robot For Less Than $100
Instructions from Easy Build my own useful Robot For Less Than $100
3.3. Assembling.So you have details (see the picture above):NB: Servo motor shaft caps, Frames and Bracket are metal.Important! When electronics are ready, connect the servo motors pllugs to it and turn the SelfieBot on connecting it to supply power...

The Code & Testing development
Instructions from Mindful Droid - Take Action against Air Pollution
I wouldn't have been able to do this part without the guidance of Ahmsville and I'm super grateful for the support he provided on this project. In addition to the animation and awareness word display feature on the droid, there are a few other...

Autonomous Indoor Drone Surveillance
Instructions from Autonomous Indoor Drone Surveillance
The first thing done was a complete teardown of the 3DR Solo to gain access to the breakout board and central computer. To begin, the LED covered and individual rotor pods were removed and unplugged from each arm (Figure 1). Each motor pod is connected...

Installing the electronics
Instructions from 8mm Film Scanner
You should put heat sinks on the Pi. Now mount the Raspi with the camera cable connected, using stand offs (if you mount a hat) and screws. In my case I mount the hat - with a stacking header, so I can connect the cable from the 3.5 inch display. ...

Simple application, UV BOT
Instructions from Autonomous UV Robot with SLAM
Now it is autonomous and can drive on its own, and sense its environment. I will be updating this Github repository with code for other applications too. import numpy as npimport mathimport matplotlib.pyplot as pltimport rospyfrom rospy.numpy_msg import...

Step 4: Code
Instructions from EMT Conduit-Mounted Wind Sensors
Because the wind sensors refresh their output approximately every 0.8 seconds, the Arduino Nano must measure those analog signals either slower or at that same rate. After taking those readings, the Arduino outputs them to a PC/laptop over Serial protocol...

The Prints:
Instructions from Make Wall Art with an iDraw A3 Pen Plotter
Print #1 (Floral Line Art) So now the question is, what to print first? I went to my favorite resource for graphics and downloaded a floral single-line SVG. The plotter printed it like a champ. Clean crisp lines on just some plain colored copy paper....

Step 5: Circuit Connections
Instructions from Maker Your Own Professional Bench Power Supply
Make all the connections as shown in the Circuit DiagramsI added a aluminum heatsink to the resistor since my resistor didn't come with aluminum body.I added one extra AC switch which has no connections, I used it for future use.

|<
<
3
4
5
6
7
>
>|