Results for C%20%EB%B0%94%EC%B9%B4%EB%9D%BC%EC%82%AC%EC%9D%B4%ED%8A%B8%EC%BF%A0%ED%8F%B0%20cddc7_com%20%E2%98%86%EB%B3%B4%EB%84%88%EC%8A%A4%EC%BD%94%EB%93%9C%20B77%E2%98%86%ED%83%9C%EC%95%88%20%EC%9B%90%EC%97%91%EC%8A%A4%EB%B2%B3%E2%91%8A%EC%9B%90%EC%A3%BC%20%EC%9B%90%EC%97%91%EC%8A%A4%EB%B2%B3%E2%94%AB%EC%95%84%EB%9E%8D%EC%B6%95%EA%B5%AC%EC%83%9D%EC%A4%91%EA%B3%84%E3%8E%97%EB%B6%80%ED%8F%89%EB%B0%94%EB%91%91%EC%9D%B4%CC%BC%EB%B0%94%EC%B9%B4%EB%9D%BC%EC%82%AC%EC%9D%B4%ED%8A%B8%EC%BF%A0%ED%8F%B0%ED%9B%84%EA%B8%B0%20soliloquist/

Miter-box cuts (mostly 90 degrees but precise)
Instructions from The Learner's Heliostat
Frame the UJ as shown except that the chamfer is on the wrong end. Complete the cuts and keep an eye on the humidity. I gather that for best results, you condition all lumber in the room where it will be cut (done) and cut everything the same day. (Or...

Step 40 - Solder 8-way connectors to 8-way 90-degree headers and phototransistor/resistor for M5 Stick C Plus 'Mako'
Instructions from "Mercator Origins": Sat Nav & Telemetry for Divers
The 8-way HAT for the M5 Stick C Plus ‘Mako’ requires an 8-way Micro JST male socket and an 8-way 90-degree header to be soldered together. All pins have straight through connections. There is also a resistor and phototransistor that needs to be connected...

Components of the AC Indoor Unit
Instructions from Air Conditioner PCB Tutorial With its Working
Some of the main components inside an AC Indoor Unit apart from the PCB are:- 1) Blower Unit:- It is a blower fan that rotates in such a way that from one end it takes the hot air inside and from the other end it sends out the cooled air. In this unit...

Controlling a Single Phase AC Motor
Instructions from Smart DIY Arduino AC Dimmer | Drive AC Loads
If you are in this step, you are already enjoying the successfull end of the project: Make shure the potentiometer is on it's min position.Turn on the system.Click on the push button to enable the dimming function.Turn the potentiometer, gradually and...

Understanding how to disconnect the speaker
Instructions from Hush Owlet
moThe big black device in the middle of the printed circuit board (PCB) is the speaker (aka buzzer, or transducer). You can see a little slit in the one side where the sound comes out. There is a back side to the circuit board that you cannot easily...

Connect the AC Cable Third to the Middle Third
Instructions from Supermicro to ATX Power Supply Adapter
Grab four M2.5x6mm bolts (screws?) and connect the AC Cable Third to the Middle Third. They don't need to be super tight.

[2016] InternetS of Energy - Call me DAISEE
Instructions from [2016] InternetS of Energy - Call me DAISEE
Ethereum installation on a Raspberry PIAn Ethereum node running on a Raspberry Pi. Photo by RIeul (CC-BY-NC-SA) Equipment 3 Raspberry Pi with Ethereum client (each Pi = a node of a blockchain) 3 SD cards 2 computers Other solution Using Wio Link to simulate...

Coding the Arduino to Record IR Code Sent by AC Remote
Instructions from Automatic Arduino based IR Remote Control
Similar to the circuit part this coding part will also be divided into two segments. In this segment, we will be coding the Arduino board to receive and record the IR code sent by the AC remote. 1. Connect the Arduino UNO with your PC. 2. Move on to...

Redtree Hydra: A modular platform for robotics
Instructions from Redtree Hydra: A modular platform for robotics
Attaching a SensorIn order to attach a sensor, motor, camera or other component to the Redtree Hydra, the FPGA inside must be programmed. We know that this is normally a tricky task, so we created a tool to simplify it. The Redtree Hydra has four I/O...

Aeroponic All-year Greenhouse on a Budged
Instructions from Aeroponic All-year Greenhouse on a Budged
Next we will prepare the water flow. I decided to use this combination of pump and tubing, because they fit without an adapter. Other combinations work also. Clear tubbing isnt the best solution, because algae will grow inside the tubes. you can prevent...

Step 14: Mount the 'Lemon' M5 Stick C Plus
Instructions from "Mercator Origins": Sat Nav & Telemetry for Divers
Insert the USB-C Plug to the M5 Stick C Plus, followed by the Grove plug for the GPS PCB also into the Stick. Insert the 90 degree header to the Stick and mount the Stick display down in the top-right corner of the enclosure, with grove socket to the...

NODE-RED CONNECTIONS!
Instructions from OBS_IRL_STREAM_DECK
The first thing we need is a basic flow to separate button presses into different outputs. [{"id":"50b49ab2.1e6f64","type":"mqtt in","z":"7805686.aa4fd98","name":"","topic":"button_glove","qos":"0","datatype":"auto","broker":"","x":310,"y":2180,"wires":[["ea9f502f.2dd17"]]},{"id":"ea9f502f.2dd17","type":"json","z":"7805686.aa4fd98","name":"","property":"payload","action":"obj","pretty":false,"x":490,"y":2180,"wires":[["425aef92.aa3da8"]]},{"id":"425aef92.aa3da8","type":"function","z":"7805686.aa4fd98","name":"ButtonSeperator","func":"var...