1979 Results for "《〈 문의 OIO↗5793↗7458 》〉강남초원의집㉩⅓everythingァ강남유흥강남룸㏁evidently 강남초원의집강남더킹 강남더킹‡강남룸Ⅹfaintly㈆"

Final checks and power on
Instructions from RETRO 1 - Home Computer Console
Double and if necessary, triple check, the cabling and wires, especially the HDMI power connector header plug. is it definitely on the correct end of the PCB connector (see photos) ?is the RED wire definitely going to PIN 40 of the PCB connector?is the...

PCB DESIGN
Instructions from Live TEMP Meter with XIAO and AHT10
The next step of this project was to put everything together to create a basic PCB that would contain all of the components we used to create the breadboard version, in addition to a lithium cell with a charge discharge circuit to power the XIAO module,...

Misadventures of in-house prototyping
Instructions from Misadventures of in-house prototyping
QUICK PRODUCTION RUN THROUGHThe board will be going through two reflows. One for each side of the board.This means the first side will be heat stressed by going through reflow twice, this is the side where temperature insensitive components should be...

Final Assembly
Instructions from VMU Zero V2 [coming soon]
Tools JBC CD1-BB Soldering StationJBC C245-768 Chisel Soldering TipSenju ESC-M705-0.3 Solder WireDesoldering WickDesoldering Pump Parts Assembled PCB (See Instruction #1)Raspberry Pi Zero W (See Instruction #2)Modified VMU Case (See Instruction #3)160...

Once you have the board, you will need to upload the software
Instructions from Pedal Powered Circuit Display
In order to do this you will need an FTDI programmer. This one from Amazon works well - https://amzn.to/3DNSsswTo also make things easier, female to female jumper wires will be needed if you don't already have some. If you don't you...

LEDs, heat sinks, fan, and temperature sensors
Instructions from Handheld UVC LED disinfector
Here are the goods! These LEDs come pre-soldered to a heat sink called a metal core printed circuit board (MCPCB). The ones selected for this project also contain a 60° lens made of special material (silica or fused quartz) since most materials...

See what your going to make and the things you'll need:
Instructions from GeoLeaf
For those of you who prefer to watch something instead of reading I have created a detailed tutorial video. Don't worry though, everything in the video (and a little more) is all explained in this guide. Though, even if you will read through this guide...

Muffsy Phono Preamp PP-3
Instructions from Muffsy Phono Preamp PP-3
Info about the Kit and Instructions OverviewThe Muffsy Phono Preamp PP-3 comes as a kit that you can order on Tindie, that includes everything needed to build a complete phono stage.To make it do anything useful, you need to complete it with a power...

Pipe construction
Instructions from PiTagErrUs
Proper alignment of the parts was a huge difficulty. It seemed like it would be an easy task to line up the parts on the top with the parts on the bottom. After all, the trigger should be right in line with the handle or it won't feel proper. Once an...

Constructing the Zinc-Copper Galvanic Cells
Instructions from Stomach Acid Powered Smart Pill
The activity tracker PCB is used to trace and cut out a piece of plastic mesh so that it will fit flush in the activity tracker enclosure. 6 strips of copper and 6 strips of zinc are cut 3mm wide and 9mm long (the width of the activity tracker PCB)....

Tools and Materials
Instructions from Collapsible UV LED Lamp + Resin Oven
Here is everything I used Consumables: Ultraviolet (UV) LED stripFoil insulation12v 5A power supplyBlue masking tapeClear packing tape18 AWG speaker wire22 AWG stranded wiresolderheat shrinkPCBSize M power connectors(8x) 24" lengths of 1/2" PVC...

Soldering the PCB and putting everything together
Instructions from SMS Garage Alert system using an Ultrasonic sensor
The next step included soldering both headers to a circuit board. I had to use a PCB to make sure, that the Ultrasonic sensor fits into the distribution box. Originally I've wanted to use a breadboard instead, but that didn't work out. Personally I had...

Connect the Componentes
Instructions from Solar Weather Station With ESP32, SIM800L, ESP8266
For start, I will solder pins to LILYGO board and sensors. Once I saw sensor readings are working I've decided to transfer all this to perfboard, add all sensors that I mentioned before in this tutorial and let's connect everything to work as we want....

BUYING THE PARTS
Instructions from Making the Ultimate Class-E Musical Tesla Coil
WARNING: DO NOT PURCHASE IMPORTANT COMPONENTS LIKE MOSFET’S OR DRIVER IC’S FROM GENERAL SHOPPING WEBSITES LIKE AMAZON OR EBAY! MANY PEOPLE HAVE PURCHASED CIRCUIT COMPONENTS FROM SUCH SITES AND FOUND THEY WERE TOTALLY USELESS. DON’T WASTE YOUR MONEY:...

Bootloading and Programming PCB
Instructions from Mini OLED Panel Meter
Burning Bootloader To program the board you need to bootload it first. To do this you need another ATMEGA328p that is already bootloaded, which is an Arduino uno or similar. On the back of the board there are 6 exposed contacts which connect to the Arduino...

|<
<
5
6
7
8
9
>
>|