Close

1008 Results for "강남권룸싸롱【θ1θ↔4⑥48↔0⑨30】xavi서울룸싸롱±선릉추천업소￡역삼풀싸롱ksubi강남룸접대paul서초풀싸롱σ강남추천업소θ선릉풀싸롱δ"

  • Spectrum Analyser Code
  • Instructions     from Spectrum Analyser Code
  • SoftwareThe code can be downloaded from the project downloads page. But here it is:#include const static char ASCII[] PROGMEM = { 0x00, 0x00, 0x00, 0x00, 0x00, // 20 0x00, 0x00, 0x5f, 0x00, 0x00, // 21 ! 0x00, 0x07, 0x00, 0x07, 0x00, // 22 " 0x14, 0x7f,...

  • Cree Dimming Level
  • Instructions     from Cree Dimming Level
  • Flash the Arduino with the following sketch. This is also included as a file attached to the project. int last_level = 0; bool last_state = false; bool stable = false; int count = 0; const int cutoffs[198] = {/* 1*/ 833, 831, /* 2*/ 825, 823, /* 3*/...

  • Source Code
  • Instructions     from Arduino Amazing Interactive Snowflake
  • #include "SoftPWM.h" #include byte edgeLedPins[] = {13, A4, A5, 2, 8, 12}; byte middleLedPins[] = {10, 6, 3, 5, 9, 11}; byte innerLedPins[] = {A2, A3, A1, 4, 7, A1}; ADCTouchSensor touchSensor = ADCTouchSensor(A0, 1); void setup() {   Serial.begin(115200);...

  • Parts and Tools
  • Instructions     from Binary Wrist Watch
  • An overview over what components and tools were used in this build. More on how the parts were selected in the next step. The components are divided among what's needed to make the PCB which acts like the watch movement, and the watch body itself. Electronics...

  • setup sensors and led
  • Instructions     from auto stop parking system
  • from machine import Pin,PWMimport timetrig = 15echo = 13led = 4 echo = Pin(echo, Pin.IN)led = Pin(led, Pin.OUT)trig = Pin(trig, Pin.OUT)servo = PWM(Pin(2), freq=50, duty=77)trig.off()time.sleep_ms(2)trig.on()time.sleep_ms(10)trig.off() def get_distance(unit="cm"): ...

  • Final Test / Power Up
  • Instructions     from THB6064AH-SMT Stepper Motor driver
  • 13. [ ] Apply only the +5 volt power again, verify the power LED lights and nothing gets hot. 14. [ ] Power off, connect motor power (but don't turn it on!) and the motor. For help with sorting out the motor leads, see: Stepper...

  • Animatronic AVP Predator cannon

  • Instructions     from Animatronic AVP Predator cannon
  • Cannon code- #include "Servo.h" // include the servo library Servo armServo; // servo to raise the arm Servo cannonServo; // servo to recoil cannon // these constants won't change: const int triggerSensor = 1; // the sensor is connected to analog pin...

  • Connect to Arduino
  • Instructions     from 4-Channel Optogenetics Pulser
  • Plug the collated ground wires into an Arduino Ground pin, and the collated +5V wires into a +5V pin (if using a Due, use the +3.3V pin or you will damage the microcontroller) and plug the other jumper wires into the correct I/O pins: Toggle switches...

  • CAN BUS Gaming Simulator
  • Instructions     from CAN BUS Gaming Simulator
  • Arduino Source Code://############################################################################################################## //Volkswagen CAN BUS Gaming //Test Sketch v3.0 //(C) by Leon Bataille 2015-2016 //Hackaday Project Page: https://hackaday.io/project/6288-volkswagen-can-bus-gaming...

  • Mapping linear LEDs into a Matrix
  • Instructions     from Ameba Neo Matrix
  • Upon getting a Digital Flexible WS2812B LED Matrix, we first need to understand the direction of how the LEDs are chained together. Upon running some demo examples, the direction of the LED lights up of my hardware is shown below: starting...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday