331 Results for "3D printing"

STEP 2: SMOOTH OUT SOME IMPERFECTIONS THAT RESULTED FROM THE 3D PRINTING PROCESS
Instructions from 3D PRINTED PORTABLE WIND TURBINE
It is recommended to sand the pieces in the places where the supports were created. Also to smooth out any bumps that could affect performance or cause damage to hands when handling. Be careful with the sharp edges of the plastic, they can cut your skin....

3D Printer modification
Instructions from Pimp my 3D Printer
Since all 3D printers are different, we will show an overview of each step rather than provide detailed documentation. It basically involves removing two parts from the 3D printer: the extruder and the hot end. Step 1: Remove the 3D printer parts We...

The top 3D-printed Raspberry Pi cases
Instructions from The top 3D Printed Raspberry Pi cases
If you are looking for the best 3D-printed Raspberry Pi cases, then you have come to the right place. In this article, we will be discussing the top 10 3D-printed Raspberry Pi cases that are available in the market. We all know that the Raspberry...

Step 2: Printing the Parts
Instructions from OpenBraille Steam
All the parts can be 3D printed. Follow the link and get the files: https://www.thingiverse.com/thing:258673

My first copter build with RPi2 and Emlid Navio2
Instructions from My first copter build with RPi2 and Emlid Navio2
3d printing of the case and anti-vibration mount. I should say that Emlid has an anti-vibration mount model only for 450mm frame. In my case I had to redesign it for 250mm. 3d model for case I've taken from here. Within the project I've attached files...

Ping3D - The Next-gen Table Tennis Blade
Instructions from Ping3D - The Next-gen Table Tennis Blade
Project and Printing SetupBefore you get started, please make sure you have a few things:3D Printer (or 3dhubs)Minimum build plate 200mm x 200mmNinjaflex (any color)Regular PLA or ABS

3D Printable Micro Peristaltic Pump
Instructions from 3D Printable Micro Peristaltic Pump
Step 2 - Break in the GearingInitially due to the nature of 3D printing the design will be locked tightly together, insert a 7.75mm hex bit into a power drill and run it for several minutes to wear in the gearing.

Building the Crop Water Stress Sensor
Instructions from Crop Water Stress Sensor
Like for most builds, these instructions start with the suggestion to fire up your 3D-printer and to start printing the 3D objects. I can recommend to use material that will last long outdoors and doesn't degrade with the weather conditions such as PETG...

How to make it
Instructions from The Omnitrix
1. Design: Design the 3D model of your Ben 10 watch using 3D modeling software such as Blender, TinkerCAD, or Fusion 360. Be sure to include spaces for electronic components, watch movement and 3D printing mechanisms. 2. 3D printing of components: Divide...

Luggable PC
Instructions from Luggable PC
Attach bottom center piece of screen frameFusion 360 object path: "References"/"Screen with Extrusion Frame"/"Printed Mounts"/"Bottom Edge Center"This piece carries most of the weight of the screen while open. So when 3D printing this piece, consider...

Platform for Raman Probe Assembly V 01.0b
Instructions from 3D Printable Raman Probe
This is the draft drawing for the V 01.0b Platform with M4 setscrew which secures the Raman probe to the base of the platform. The holes on the platform are there on purpose for 2 reasons, 1 for cost savings on material when 3d printing and 2 they are...

Assemble the grip
Instructions from Enchanted Thor Hammer
Start by inserting the 1/2" PVC conduit into the top portion of the grip, through the handle and in to the bottom portion of the hammer head. There are 2 distinct benefits of using a PVC pipe. It adds a lot of strength on the slender portion of the assembly...

Different Steps of the Project : Space Invaders
Instructions from Space Invader's
Different Steps of the Project : Space Invaders Step 1: Project Planning and Team Coordination 1.1 Define Project Scope and Objectives: Clearly outline the goals of the Space Invaders Physical Controller project. Identify key functionalities, features,...

STEP 7: SCREW-DOWN THE NP-F BATTERY MOUNTING PLATE
Instructions from 3D PRINTED PORTABLE WIND TURBINE
You are probably wondering what is the reason for this Mounting Plate to be a separate piece from the central body. I decided to do it this way for 2 main reasons. The first is that it makes the 3D printing of the central body less complex by requiring...

Designing the button cap
Instructions from Quiz-o-matic wireless buzzers
An important part of the quiz experience is smashing the buzzer button when you figure out the answer. Typical 10mm diameter buttons weren't going to cut it because they're too small for the satisfaction. Sizeable arcade buttons weren't available cheap...

|<
<
1
2
3
4
5
>
>|