Section: 6A complete Filter Selector AssemblyComponents Required: Printed versions of the following 3D Printed Objects from the gitHub repository: mechanical_device_filterSelectorAssembly_frontmechanical_device_filterSelectorAssembly_backmechanical_device_filterSelectorAssembly_filterWheelmechanical_device_filterSelectorAssembly_centerHub_Backmechanical_device_filterSelectorAssembly_522nmSP_covermechanical_device_filterSelectorAssembly_550nmSP_cover(1x)...
Section: 7A Completed Spectrometer. A note might be made here that this spectrometer can and will function as an independant device connected to a regular PC running the ramanPi spectraCide software! If you wanted to use it and not build...
5.Program your microcontroller with the following BASCOM code:''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''' Infrared Remote Control Transmitter for Nikon D90' -------------------------------------------------'' ...
Time to apply Ohm's Law to determine proper resistor values. Pretty simple: V=IR, and since the resistor is connected between ground and each supply rail, V = supply voltage. They give us current, so we can calculate the three resistor values:3.3V rail:...
Let's get cracking, get the Carambola up and running. I like to connect to the serial terminal, the development board features a usb ftdi chip allowing me to use a terminal program like PuTTy to connect.Connecting to serial terminalFirst step: see that...
Step 1: Motherboard Assembly and ProgrammingI designed all of the boards to be hand solder friendly, with leadless QFNs all on one side (that can be reflowed). If the other side has components, these are usually larger and easier to hand solder. Step...
http://www.tricorderproject.org/arducorder/chipkit-mplab-ide-0023-arducorder.ziphttp://www.tricorderproject.org/arducorder/chipkit-mplab-ide-0023-arducorder.zipStep 3: Constructing the CaseThis beautiful case is constructed from laser cut acrylic --...
### [ WRITE IMAGE TO SD ]wget "http://93.174.101.10/bt/09bc05ab03780f279390e9cf6a15c7c249f712e1/data/2014-01-07-wheezy-raspbian.zip"7z x 2014-01-07-wheezy-raspbian.zipSD_CARD=/dev/sdX # Change it to your SD card device namemd5sum 2014-01-07-wheezy-raspbian.img...
For the controller and PIR the NRF24L01 uses the same pins to connect to arduino, Pin connections are,- Vcc - 3v3- CE - Pin 9- CSN - Pin 10- SCK - Pin 13- MOSI - Pin 11- MISO - Pin 12- GND - 0v- On the controller board you will need to connect to...
For the 4x2 header, you can see here I've removed two of the pins. One with plastic missing to help identify which way round. The open hole provides a place for the notch protruding out of the connector to sit firmly. Make sure you take note of this...
First you need to verify to correct operation of the RF devices. This will be easy by a LED indicator, the control will be managed by two keys "w" and "s" of your computer's keyboard.Connect VCC to 5V pin.GND to GND pin.Data to pin 12 in both Arduinos.LED...
Now, you need to verify visually with LEDs the four outputs that should go to the H bridge, reds colors indicate forward, greens colors indicate backward, one red and one green colors indicate the turn left or right respectively. The control will be...
Once you have the correct programming of what will be the engine performance you need review the functioning and values of the MPU-6050 accelerometer. The X and Y axes are as the device is marked on the card.VCC to 5V pin.GND to GND pin.SCL to A5 pin.SDA...