928 Results for "8-bit cpu"

Nextion LCD Touchscreen Tutorial for Arduino
Instructions from Nextion LCD Touchscreen Tutorial for Arduino
Installing Firmware via an SD CardFor this first part of the tutorial we are going to be using a firmware that demonstrates a couple of buttons, a progress bar and a text field.In the firmware folder in the library you will find the .tft files:2.4" Nextion...

Cree Dimming Level
Instructions from Cree Dimming Level
Flash the Arduino with the following sketch. This is also included as a file attached to the project. int last_level = 0; bool last_state = false; bool stable = false; int count = 0; const int cutoffs[198] = {/* 1*/ 833, 831, /* 2*/ 825, 823, /* 3*/...

Backend assembly
Instructions from OSUG: Open-Source Underwater Glider
Attach the Fathom-S ROV board to the “Fathom-S_mounting_bracket” using 4 M3 10mm bolts and 4 M3 nuts, making sure that the orientation of the board is correct. Cut 2 sections of red and black silicone wire and strip the ends. Use this wire...

Setup the Arduino IDE with your device
Instructions from Connect Your ESP8266 to Any Available WiFi Network
To start with any ESP8266 device you have to install the boards into the Arduino IDE, please follow the steps below to be able to compile the board. Please download the Arduino IDE if you do not already have it. 1.- Open the Arduino IDE, select...

Designing the System
Instructions from Smart Coffee Machine Pump
System’s Logic The system is designed with the following simple logic in mind: The system constantly monitors the distance between the sensor and the water surface.Whenever a change in distance goes over a threshold value, the system sends information...

Step 4: Arduino Code For Astronomia
Instructions from Astronomia Coffin Dance Music Using Arduino Uno
Coffin Dance Arduino CodeAstronomia codefor Arduino is given below. Copy the below code and paste it in Arduino IDE then upload to the Arduino board.#define NOTE_B0 31 #define NOTE_C1 33 #define NOTE_CS1 35 #define NOTE_D1 37 #define NOTE_DS1 39 #define...

Source Code
Instructions from Arduino Amazing Interactive Snowflake
#include "SoftPWM.h" #include byte edgeLedPins[] = {13, A4, A5, 2, 8, 12}; byte middleLedPins[] = {10, 6, 3, 5, 9, 11}; byte innerLedPins[] = {A2, A3, A1, 4, 7, A1}; ADCTouchSensor touchSensor = ADCTouchSensor(A0, 1); void setup() { Serial.begin(115200);...

Step 9: The code
Instructions from Build Interactive Bridge Using Minecraft Raspi
Now, it’s time to start our program! First, import the a few libraries, such as MCPI library which is the Minecraft Pi Python library that allows us to use a very simple API to integrate with the Minecraft world; time library which allows us to us sleep...

Part 2: Materials Testing and Proof-of-Concept
Instructions from Bipolar Membrane Energy Harvester
Though you do not need to build the proof-of-concept device in order to make the flow cell in part 3, we do recommend that if you want to thoroughly validate the effect observed, you go through the materials testing process for all of your materials,...

Wii Stream: Turn your Wii into a Sonos
Instructions from Wii Stream: Turn your Wii into a Sonos
Introduction This guide details the steps for installing WiiStream on your Nintendo Wii. Follow each step closely for a successful setup. Prerequisites A Nintendo Wii matching one of the model numbers hereAn SD cardA PC with internet access (here...

Step 13: Setting up the object detection model on FireBeetle 2 ESP32-S3
Instructions from Multi-Model AI-Based Mechanical Anomaly Detector
After building, training, and deploying my object detection model as an Arduino library on Edge Impulse, I needed to upload the generated Arduino library to FireBeetle 2 ESP32-S3 to run the model directly so as to recognize the specialized components...

Raspi Newspaper Synthesizer/Reader
Instructions from Raspi Newspaper Synthesizer/Reader
Now we need to add a file that is missing from the tts repositories. Fortunately Google themselves make it available but it needs some modifications to make it work with the Raspi port. You can find the file at https://android.googlesource.com/platform/external/svox/+/9b08cc440f25c4722ca112642be87053fc47f918/pico/tts/com_svox_picottsengine.cpp...

Instructions
Instructions from Budget DIY ESP32 GPS Base Station and Receiver
Best Budget DIY GPS/GNSS Base Station using the UM980 and a ESP32Introduction The ESP32 is a versatile microcontroller renowned for its WiFi and Bluetooth capabilities. In this guide, we’ll walk you through setting up the your ESP32 development board...

Step 1: Configuring Wireless Interfaces for Hotspot 2.0 on OpenWRT
Instructions from Configuring Hotspot 2.0 on OpenWRT Devices
In the /etc/config/wireless file, customize the settings for your Hotspot 2.0-enabled interface. Ensure the correct device, encryption type, and other parameters are set. Pay attention to the WAN Metrics, NAI Realm, and Domain Names sections to tailor...

Upload the Source Code to Arduino
Instructions from Useless JokeBot
Here’s the programming rationale behind the code, which you can download from the project files. The main idea is to generate a punchline that does never matches the joke. This makes the whole sentence not particularly funny, and probably confusing. ...

|<
<
59
60
61
62
>
>|