Close

1804 Results for "Q%20%EC%95%88%EC%82%B0%EB%B8%94%EB%9E%99%EC%9E%AD%20CDDC7_C%D0%9EM%20%E2%97%86%EB%B3%B4%EB%84%88%EC%8A%A4%EB%B2%88%ED%98%B8%20B77%E2%97%86%EC%88%98%EC%9B%90%EC%9E%A5%EC%95%88%20%ED%94%84%EB%A1%9C%ED%86%A0%20%EA%B5%AC%EB%A7%A4%E0%B9%8F%ED%86%A0%ED%86%A0%ED%95%AB%ED%94%BD%E2%8F%AC%EC%98%A8%EB%9D%BC%EC%9D%B8%ED%99%A9%EA%B8%88%EC%84%B1%E0%BC%88FX%EB%A7%A4%EB%A7%A4%E2%8B%8D%EC%95%88%EC%82%B0%EB%B8%94%EB%9E%99%EC%9E%AD%EC%95%A0%EC%9A%A9%20thorough/"

  • Connecting the Sensors to the Board
  • Instructions     from Pet Pot
  • Now, let's connect the sensors to the unihiker board. The air quality and environment sensors can be easily connected using the provided connectors, thanks to the manufacturer's user-friendly design. Follow the diagram for proper connections. Air Quality...

  • Bill of Materials
  • Instructions     from Handheld Raspberry PI Retro Game Console
  • NamePriceCountLinkRaspberry PI 4$75.001canakit.comTeensy++ 2.0$24.001pjrc.com5" Display$54.001amazon.comRetroPSU$251Heldergametech.comSafe Shutdown Board$101humblebazooka.comLiPo Battery$20.091amazon.comHDMI Connector$6.001amazon.comMicro HDMI Connector$6.001amazon.comRibbon...

  • Step 4: the code
  • Instructions     from Modular 5-bar robot
  • Download and open the code folder on your code editor software of your preference (e.g. vs code) and open the Scara.py file. Then, check that the ID's in the Scara.py file match the ID's that you set up on the servos. These ID's are on the firsts lines...

  • Wire and test the head servo
  • Instructions     from Hack Skellington
  • At this point, you'll want to test the head servo motion: First, to make sure it worksSecondly, its fun to see half of a skeleton head move back and forth We'll use a small single board computer (SBC) as the "brain" of the operation, as well as a PCA9685...

  • Upload the Sketch
  • Instructions     from Arduino RF Controlled Robot
  • Now let's upload the sketches to the Arduino Boards. You can get the sketch from below. // TRANSMITTER CODE#include const int X_AX = A0; const int Y_AX = A1; void setup() { Serial.begin(9600); Serial.println("setup"); vw_setup(2000); vw_set_tx_pin(12);...

  • Circuit Design
  • Instructions     from Analog Signal Generator for Industrial Controls
  • The heart of the design is the LM358 Dual Operational Amplifier (Op Amp). An Op Amp amplifies a signal and has a couple of main advantages over just using a BJT transistor as an amplifier because it has a very high input impedance (resistance) and a...

  • Plug in your GPS and make sure it's working
  • Instructions     from Pi Planet Finder
  • In the previous step you installed GPSD, the standard Linux daemon for interfacing with GPS hardware.  Now we need to make sure it's working.First, plug in your USB GPS.  Nothing visible will happen on the screen, but if you examine the last...

  • Get the time from NTP
  • Instructions     from Raspberry PI wireless Telescope Control
  • By default the PI automatically syncs the time if it has connection to the internet. But I want to go one step further. So let's install an NTP server. Later we can also use the time from GPS with the NTP server. To make things a little easier, let's...

  • POST STROKE SPASTICITY REHAB HELPER

  • Instructions     from ReHubJr Rehabilitation Helper
  • Bill of Materials We use in the project the components No Q Name Description 1 2 Controller Arduino nano R3  2 6 Tenzo Bridge Pressure Sensor Scale Module 3 6 ADC fo Tenzo Bridge HX-711 4 12 Servo mini SG90 Servo mini SG90 9g Tower Pro 5 0 Blue...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday