Close

27106 Results for "《 예약문의 OIO≡⑧④89≡83O⑥》강남하이킥레깅스룸Χぬscheme하이킥레깅스룸⊂선릉하이킥강남하이킥레깅스룸⑪も강남하이킥they 강남하이킥레깅스룸㈌선릉하이킥ㅼぷpoor"

  • Thermal Performance

  • It is important to check the thermal performance of a living space with an infrared temperature sensor or Thermal Imaging Camera in order to identify hot or cold spots that could be caused by air gaps or poor sealing. Here are some examples of ceiling...
  • Sci-fi grade Home Automation

  • To build the light switches (I'm not using these, but they might work better for those of you who don't rent):Using the pictues below as guides, solder the relevant wires to the Arduino...I kid.There are a few important parts here: There's the Arduino,...
  • Physical Build

  • The build is pretty straightforward: Attach the e-Paper display to the HAT using the supplied ribbon cablesAttach the e-Paper HAT to the GPIO headersAttach the e-Paper ribbon cable to the e-Paper displayFollow the SlimPi install instructions over...
  • Bed Leveling

  • The removable build plates included with the Stratsys Uprint 3D printers are uneven, thus the OE use of a large raft and removable support filament.  I suggest attaching an Ender 3 sized build plate to the top of the removable build plate. ...
  • make the base

  • I used a wooden round base that was originally from an Ikea display glass dome (the glass dome was a victim of poor shelf management).  I found a Ikea lampshade plastic tube with 3 'feet' that could be used to keep the glass insulator centered on...
  • Specification

  • itemcontentremarksPower-supply voltage5VAssuming USB power supplycontroller voltage5V, 3.3Vconsumption current180mA (scan time 1.2mS)Typical value for a single sensor board, power consumption1WTypical value for a single sensor board, Scan...
  • Software

  • Software Install Armbian for Orange Pi from here: https://www.armbian.com/orange-pi-lite/Install ROS kinetic echo "deb http://packages.ros.org/ros/ubuntu $(lsb_release -sc) main" >ros-latest.list sudo cp ros-latest.list /etc/apt/sources.list.d/...
  • Portable environmental monitor

  • Populate the board. You will need some good experience with 0805 SMD soldering, and some tools like soldering iron and hot air rework station. Start with the bottom side, with the microcontroller, the other ICs and finally the small passive components....
  • 4000mW WiFi Rifle

  • FixesI bought a sketchy 25dBi Yagi-Uda antenna from China which did not perform great out-of-the-box. It had a hard time detecting access points just a few meters away, and my 5dBi Dipole antenna outperformed it in every way (even the range!). I did...
  • Piezo triggers

  • There are so many different design of triggers in the internet but... Vast majority of them do not really look like a thoughtful solution or something reliable.Initially, I started with a classical design of a foam cone in a center:But there are two...