35398 Results for "↘ 최저가 Ò1Ò〈⑻⑷89〉83Ò⑥ ↗ 쓰리아워ㅾ Йlife강남술집정보ħ쓰리아워레깅스룸강남쓰리아워７┢강남술집정보indignation 쓰리아워레깅스룸ケ쓰리아워ı㎃outside"

Week 11- Progress and Operation
Log from Dynamic Interactive - Story
Figure shape no.2, after done and check the main figure shape, can just direct to crate the other one, so other side is just a normally the little action of the mouth, so is no any problems for this part .The detail view of figure No.2.The view of two...

IT IS DONE! *
Log from Trackball PC
* Well, maybe not quite.Finished, assembled, and... wait, what?You'd think I'd have my ducks in a row better than this. I finished it, including swivel-mounting the screen in a nifty way... and promptly discovered that I have no standard HDMI cables.Oh,...

Modified heart base
Log from Project Healing Heart
After my assembling my first iteration of the heart base, a few issues surfaced.The perf board was raised above the rest of the heart base. I decided it was a much better idea to recess the perf board into the base so that the top sits flush with the...

Cutting Heads
Log from Building Another Laser Cutter
I got the main head adapter mounted and installed. Machined it from some PPS plastic I had lying around. I did end up having to machine the nose of the 1.5" lens assy back a but to get the focal point outside the nozzle.Also got the other head cleaned...

Raspberry pi failure
Log from Piano signal processor
The 1st idea was to read audio via the I2S to USB converter of 10 years ago, then write it to a junk USB soundcard in realtime after processing. This was the 1st time that soundcard produced any useful sound in 20 years, but it was an instant...

More test using Fourier Transform and Oscilloscope
Log from Radar Sensor
I thought it would be a good idea to make some side by side comparisons of the unit operating inside a clutter room and outside, pointing up in the air. A digital high pass filter was used to set all the low frequency fundamentals and first set of harmonics...

Ready to go outside: the assembling
Log from mysoltrk - a solar tracker, reinvented
These days we have focused on transforming the breadboard circuit into a solderable breadboard circuit, adding a small box to enclose everything. Here is the result of prototype #2: As you can see, all components used on prototype #1 are in prototype...

Mystery of Green and Blue light
Log from Automatic Diet Tracker
I know the title sounds really mysterious, but just have a look at the gathered data.(Date Time R_max R_min G_max G_min B_max B_min Ir_max Ir_min)2014/8/23 0:39:55 55 49 1 0 1 0 25 22 2014/8/23 0:59:1 84 73 2 1 1 0 47 41 2014/8/23 9:7:35 97 87 3 1 2...

Deep Sleep
Log from ESP8266 Native
I've been testing the deep sleep mode on the ESP-03. I loaded the frankenstein firmware from here https://github.com/nekromant/esp8266-frankenstein onto the module to test the deep sleep mode.Note, you need to tie gpio15 to GND in order to boot any firmware...

Reverse Engineering from Package Data
Log from Reverse Engineering a Drone
As you can see airodump-ng picked up the WiFi of the drone and also that it is running on channel 2. Next I recorded some packages. sudo airodump-ng -w JJRC_out -c 2 -bssid 10:A4:BE:2E:77:B5 wlan0mon While recording I simply used all the functions the...

Delta coding and some stats
Log from PEAC Pisano with End-Around Carry algorithm
With the new harvest, I estimate that the perfect and maximal orbits under m=1M is around 100K. This starts to make quite a large .h file to include in the sieve generator. Not that it's such a concern but scalability, you know.... And embedding such...

Replacement LCD and signal adaptor
Log from Toshiba T3200SXC fix/upgrade: new PSU, LCD, WiFi
I wanted to connect replacement LCD to the original LCD connector, with no "ugly hacks" like interfacing with VGA connector and other workarounds. The original LCD used 9-bit TTL RGB interface (3 pins for red, 3 pins for green, 3 pins for red), which...

More Power Igor
Log from Cardware
Well, finally I was let down by a lack of amps, the batteries I have just arent strong enough to move the limbs without at least doubling them. And I'll need to upgrade the regulators. Such is life...I added a little bit of code to the Pi's monitor....

Let's talk sockets
Log from Pulse sensor to actuate a Robotic Hand
So, history time. When we "finished" the hand and were ready to give it to Andres to wear it we had the problem about what goes between the hand and the sensor. We went to some local prostethic sensor like we'll buy it give them some directions...

Mockup 1
Log from Solar filament drier
The motor fuse ended up being a 1R resistor which drops the voltage from 5 to 4.5. There's a 1 second deadband to wait for the starting torque, then the voltage is downsampled to 4Hz. If it stalls, the voltage goes to 3.3, the fuse is blown...

|<
<
3
4
5
6
7
>
>|