31929 Results for "㉣ 피망바둑 ㈍ rka119.top ㅰ 그레잇게임 ㈖ 사설홀덤 ㆌ 포카치는법주소 ㉫ 노리팡바둑이 ㈔ 배터리사이트게임주소 ㈓ 텍사스홀덤추천 ㈚ 맞고게임추천"

Final PCB Design
Log from ESP IoT Controller
I have access to a small CNC-Milling machine. Therefore I designed an 1-layer board with relative thick traces 0.4mm (15.75 mils). I wasn't able to route everything on the top layer, so I have to use some jumper wires for the bottom layer.

Planetary gear box
Log from GearBoxes.py
This is the first design I am trying out. There already is a generator alredy online but it is just not there yet.The gear box will be build from laminated layers starting at the bottom with the plate for mounting the motor. On top of that are rings...

Feeder controller
Log from brdMaker
Controller now integrated inside feeder. Can be used/flashed over usb serial. Also contains rs485 for connecting multiple feeders into same bus(spring pins not visible). 2 motor drivers, 4 buttons and 1 rgb led on top.

Update #4
Log from Star Wars Mouse Droid with Hidden Payload
Update #4: Automated side door working (see the Part 3 video)!Top shell printed out and bonded togetherIt actually is starting to look like a Mouse Droid now :)

PCB Design - Side Panels & Top - Initial Design
Log from LED Cubular - LED Desktop Cube
Side PanelsThe side panels for the LED Cubular are as simplistic as possible. Each one will have 64 LEDs on the front (no silk screen) and on the back is the connectors for the top and bottom and a max7219 which is a dedicated LED driver chip that can...

Load Cell
Log from NSFW Cocktail Machine
The load cell is placed between two plywood plates, attached via 4 M3/M4 screws. Top plate is where the cocktail glass is placed and causes the strain on aluminum cell and piezoresistor bridge attached to it.

Mech Update #13
Log from 2021 HDP Dream Team: EJA
Note: The content in this update was from August 22nd. With time getting closer to the deadline, the pressure is ON to start testing something. The plan is to make a DIY Buoy B with some supplies here, in order to test some of the mechanical and design...

Inspiration
Log from CoreXY Ender 3
I found a cool Project here: https://github.com/zulboy45/Ender3-to-CoreXY?fbclid=IwAR18cxSwDtoJ1wr7m4TeOgFg0RAzKkAhcWCSdD0DSDerQwnZ3H9kSTXD5k8It's unfinished, but got some inspiration for the top of the machine.

Center Structure
Log from Apollo Crawler
The center structure consists of a whole lot of I-beams and posts. There are also walls containing windows and doors. Within these walls is a computer room that is walled off from the engines and pumps. I have glued in everything except...

Potting the Connectors
Log from Otter Force One
The thrusters have cables that need to go inside the waterproof enclosure. To do this, cable penetrators are used. The cable goes through the hollow of the penetrator, which gets filled with marine epoxy. The penetrator is then compressed with two small...

Adding the Top
Log from Galaxy6D: simple DIY full 6D space mouse
Since the first step was working now without the top, I redesigned a the top to add a mounting for the IMU and hole to screw in a possible cover later: Then I used some UV curing paint to protect the copper around the spring mounts for short circuits:...

More Progress
Log from Drum Master
I have made a lot of progress over the past few weeks, but have been horrible about updating the logs here. This is my attempt to rectify that error. ;-)The electronic / hardware side is pretty much completed. I have tested everything as much as possible...

Test Table Mode
Log from 2600 Magazine Storage System
bilherd 3:07 PM I "cheat" and use the vendor specific tools such as Altera and Xylinx, what are the open source alteratives? salec 3:07 PM You compiled your notes, professor! DPM 3:07 PM How about a "Best choice for beginners" in logic simulators?...

Roll Experiment Design
Log from Kite Propulsion
What if the kite could spin a conveyor belt platform via an external wheel? Instead of capturing a rotating wheel inside a housing with contact bearings. The first step is to verify that the kite can move a wheel on the ground. The Roll Experiment...

MEDICYCLE HELMET DISPLAY update 1
Log from Medicycle - Urban Responder
When working on a new project its always a good idea to plan ahead, its easier to build around parts you have then to find parts that will fit what you have built.This is a preliminary list of components for the helmet display and where to find them.Head...

|<
<
1
2
3
4
5
>
>|