Close

8219 Results for "3D printing"

  • forearm deadbolt turn

  • Deadbolt lock levers are another door feature that require hands to operate. This project log discusses a 3D printed hack that allows the user to turn the deadbolt lever with their forearm. The video below demonstrates the right handed and left handed...
  • PCB encoder milling

  • @Steven.Carr has been happily milling out PC boards and laser cut experiments on his very nice equipment.  I was growing envious as I sit here airwiring stuff. Four years later, I finally got around to building the PCB milling attachment...
  • End of build thoughts.

  • 10 April 2020. The first generation of this project is complete. It is the first one that I am uploading to HackaDay. I had no intention of uploading this when I started. None of the code was written with others in mind. I have supplied it here for the...
  • New rotation motor & source on GitHub

  • Over the past few weeks I found another, cheaper servo that's still strong enough to rotate the arm:https://www.gobilda.com/5202-series-yellow-jacket-planetary-gear-motor-188-1-ratio-30-rpm-3-3-5v-encoder/It has a built-in encoder, 100N of force,...
  • FM Demodulation Revisit

  • Finally came back around to revisit the FM demodulation mode of the AX5043, it has been 2 years since the first tests! One of the motivation factors is to get the VUHFRadio module to receive and demodulate NBFM besides the already working WBFM, and also...
  • Initial Design

  • May 31, 2020 | ProgressTH What started out as a quick temperature sensor/display set up quickly escalated into a much larger project.I needed to display the temperature in different parts of the home office and ended up using a spare powerbank, Arduino,...
  • WinDIY in action

  • After having programmed the controller for almost a week, it was finally time to test WinDIY again. To do this, I set up the wind turbine on a small hill nearby. First the bad news: Since the test on my generator test stand, I was a bit skeptical whether...
  • Introducing Vine-K !!!!

  • Hey folks, been hard at work developing all the hardware in this new ecosystem, tonight I have a new device to introduce, Vine-K. K is the universal designator symbol relays or contactors and if you can follow where I'm going with this Vine-K is...
  • CTF Results & Walkthrough (Part 3)

  • What are the Lulz Quizzes? These are small point value Q&A. If you get it right +5, if you get it wrong -10. How do you dig out of that hole? Well different flags are provided if you got it "right" vs "wrong." So you reset the badge, re-randomize the...
  • Housing and Transducer mounting

  • For the echosounder I need to create a housing  that has the following specifications: Waterproof to a few metersCan be opened and closed Contains feed-through for cables or connectorsCheap, preferable made from off the shelf parts Now I designed...
  • Brightness Check

  • Now that I created 3D printed shims for the LEDs to nestle under, I was really curious which LED configuration would have the best & brightest light distribution. So I threw together a test board.  Here's the board. Each one encapsulates both LEDs...