27106 Results for "《 예약문의 OIO≡⑧④89≡83O⑥》강남하이킥레깅스룸Χぬscheme하이킥레깅스룸⊂선릉하이킥강남하이킥레깅스룸⑪も강남하이킥they 강남하이킥레깅스룸㈌선릉하이킥ㅼぷpoor"

Open Indirect Ophthalmoscope
Instructions from Open Indirect Ophthalmoscope
The step by step build instructions for "OIO" can be found here: http://www.instructables.com/id/Open-Indirect-Ophthalmoscope-OIO/

OctoLamp
Instructions from OctoLamp
Gut the poor thing. Keep the ballasts maybe, you're bound to find something fun to do with them.

aquaPionics
Instructions from aquaPionics
Now load the main aquaponics sketch and customise it so that the delay period is as required - every 5 seconds will give you poor battery life - every 60 seconds is more reasonable. Once the sensor sketch is uploaded you should see reading appearing...

Wireless Arduino-powered Vibrator
Instructions from Wireless Arduino-powered Vibrator
Now poor silicone into the molding. We use Shore A 45 silicone which is rather hard. The silicone has to dry for some hours or days. Read the instructions of your silicone provider.

Install scripts
Instructions from Poor Man's Polaroid
- Clone https://github.com/kami4ka/Poor-Man-s-Polaroid to your single-board PC- Install requirements for Python script (pip install -r requirements.txt)- Change GPIO lib setup inside script to fit your wiring- Add main.py file to...

Poor workmanship disclaimer ;^)
Instructions from Z88 Tribute Computer
I know, I know. In the photos of this project there are scratches on the casing, there appears to be a massive hole that looks as though it was cut with a chainsaw, there is glue all over the place, the 3D printed parts look as though they were made...

Embedded Puredata + Wireless
Instructions from Embedded Puredata + Wireless
Optional: Getting sound output from puredataThe built in sound on the raspberry pi 1 is quite poor, so I used an external USB soundcard (GWC Technologies AA1570), however, any of the cards found here should work. If you don't need sound for your puredata...

Almost Finished - Adjust Focal Length
Instructions from USB Microscope
It looks like it's finished once all the microscope parts are reassembled, until we realise that the focal length is somewhere between poor and completely useless... To get anything into focus we'll need to pile up a load of stuff on the stage. We then...

Operation Instructions
Instructions from Does My Breath Stink?
When the device is assembled, use it to trick your friends and remind yourself and others of the consequences of poor dental hygiene. Turn on the battery pack. Instruct the soon-to-be victim to press the button, then wait no more than 5 seconds before...

Print out the six 3D parts
Instructions from Feeding Experimentation Device (FED) 2.0
The print needs to be of decent quality. It is a mechanical pellet dispenser, so if your print is poor it may jam or not work correctly. I printed these in PLA on a Sindoh 3DWox printer. STL files located in the files area. ...

Solder X wires between FPC breakout board to the Microcontroller.
Instructions from QMK Powered Laptop Keyboard
For me X = 24. and i had poor experience with digital pin 33 and digital pin 25. this is attributed to set up issues which i am not sure how to solve so i just switched pins.i used wire wrapping wire for this, as i wanted to maintain flexibility and...

Animated Darth Vader build monitor
Instructions from Animated Darth Vader build monitor
Gut the lightsaber - removing the AA battery, switch, boost converter board and red LED. There are some tiny screws holding it together, but nothing too tricky.Replace the 5mm red LED with the RGB LED. Drill a small hole in the side of the lightsaber...

i♥Me4e
Instructions from i♥Me4e
Finishing the boxing, starting with sewing the label to the pluche .... and then jailing Me4e ( poor littl' thing :/ )Once the package is closed, we use a large ribbon to hide the maximum of the box possible ( for a greater surprise ! ^^ )Now !It's thirty...

Garden Squid
Instructions from Garden Squid
1-wire network (optional):Use your resistors and capacitors to build the circuit for the 1-wire network. Match the 1-wire bus, ground, and +5V to 3 wires on CAT5 cable.Crimp on an RJ11 end onto the cable, which will allow you to use RJ11 junction box...

Get started
Instructions from Neoway M590 Undocumented Commands/ Features
To get started, get some M590 modules. I remcommend getting several modules becuase sometimes a used module is less than perfect and may have poor signal quality or some other problem. Build up the M590 PCB and connect to it a USB TTL...

1
2
3
4
5
>
>|