27106 Results for "《〈 문의 OIO↗5793↗7458 》〉 강남셔츠룸ㅬ レresidence㎱강남셔츠룸신사셔츠룸⑧appetite 강남셔츠룸강남란제리 강남셔츠룸╃강남란제리″names㏊"

Management of the data in Ubidots
Instructions from Build a Tank Volume Reader in Under $30 with ESP32
If your device is correctly connected you will see a new device created within your device section in your Ubidots application. The name of the device will be "esp32", also inside the device you will see the variables distance, humidity, and temperature:...

Build and Upload
Instructions from Robotic Berimbau Orchestra
Build Dependencies avr-gcc (>= 4.9)avrdudemake Installing the AVR GCC Tool Chain GNU/Linux Ubuntu (16.04) $ sudo apt install make avr-libc avrdude binutils-avr gcc-avr Arch Linux $ sudo pacman -S avr-gcc avr-binutils make avr-libc avrdude Remember to...

Sketch
Instructions from Building an Arduino Energy Monitor & Data Logger
Ok, now to move on to the actual programming! I have added this sketch as an example to my Dr. Wattson library which is available on GitHub - https://github.com/upbeatlabs/drwattson - simply download and install the Arduino library, and...

First test, part 1: Successful startup
Instructions from PlayVideo: adaptive video player
Insert a keyboard and mouse into to open USB slots. Connect an HDMI monitor. If the monitor does not have audio, connect amplified speakers to the speaker jack of the Raspberry Pi. Power up the Raspberry Pi with a wall charger (1 Amp or greater). It...

Buy brass insert nuts
Instructions from Supermicro to ATX Power Supply Adapter
These bad boys have so many different names that a single eBay/Amazon search won't find all the sales. Here is a list of adjectives that you should use when searching. KnurledInsert NutsBlindBlind HoleSingle Pass ThroughBrassInjection MoldingThreaded...

Step 2 First AccelStepper Sketch
Instructions from Using the Arduino AccelStepper Library
Suggested reading: Constructing an AccelStepper ObjectNow that you have learned to connect your motor to a suitable driver, and have it hooked to your Arduino, it's time to start a first sketch. The first one we will look at is really simple. Load the...

Step 2: Leg Assembly Stages
Instructions from Spider Robot with Arduino
You have to make the leg connections by following the step-by-step visuals. You can make the connections by following the step names from the schematic. Repeat steps 1 through 10 exactly 4 times and build 4 legs : Step 1 : Place a servo...

Citroen Hy bus front
Instructions from Camperwagon 3.0 - Eljestmobile
On the two U shaped beams a skeleton construction to reassemble the front of a Citroen Hy bus is created using plastic (PVC) L shape 30x20x3mm beams and 3D printed corners (to create the proper angulars) Onshape 3D (open/free version) was used to create...

Electronics Assembly - Commands and Usage
Instructions from Low Cost Universal Tensile Testing Machine
Operating Modes There are five main testing modes that are available in this machine: Slow tensile testFast tensile testSlow compression testFast compression testModulus test The names themselves are self-explanatory except for modulus test. This test...

Step 11: Building an object detection (FOMO) model with Edge Impulse
Instructions from Multi-Model AI-Based Mechanical Anomaly Detector
When I completed capturing images of specialized components representing defective parts causing mechanical deviations in a production line and storing the captured samples on the microSD card, I started to work on my object detection (FOMO) model to...

RPi WiFi
Instructions from RPi WiFi
Make the connections between the ESP-12F or -12E and the Raspberry Pi HAT. Keep wires short as possible, and minimize the number of times they cross over each other. If you're using magnet wire or Kynar (standard issue blue wire) you might want to use...

Step 3: CREATE YOUR SMART BUTTONS ON YOUR BREADBOARD AND CONNECT TO PROTA PI
Instructions from Entrance Master Remote (w/ Raspberry Pi)
A breadboard is a board that helps you connect electronic components together and to your micro-computer Raspberry Pi. A small breadboard can be enough for this project (the GIF above were taken from the DIY Jukebox project wth a bigger one.First, let’s...

Upload the code into the mcDemo205
Instructions from Connect your mcDemo205 over Sigfox to Ubidots
The mcStudio allows you run the code in a debug mode for testing propose, if needed. Run a test of your code by pressing the "Run" icon located at the top-right of the IDE toolbar. As you can see below, the project is running. If you desire to make an...

Management of the data in Ubidots
Instructions from Build an Energy Monitor device Particle+Ubidots
Once the particle electron has sent its first message, a new device will be created and can be found in the Device section of your Ubidots application. The name of the device will be "particle", also inside the device you will see the variable current...

Before you start assembling
Instructions from Oasis 3DP
You want to build an Oasis. Neat. Be aware that it is a prototype and not a finished, optimized product. Toolchain, Software and firmware still needs to be optimized. Why is there documentation if it is not finished. Because it works. All the most up...

|<
<
3
4
5
6
7
>
>|