0%

0%

AlanGreen

Get Your Hands Dirty !

ChengDu, China

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

GitHub

This user joined on 04/21/2018.

Projects I Like & Follow

Software to create your own Knit-like string pictures.

DIY Knit Portrait

I upgraded my cheap $154 3D printer into a high quality 3D printer with 3D printed parts which you can download for free.

Upgraded cheap 3D printer into a high quality

Mateo Miličević

The 2018 Hackaday Prize

This project is about building and programming an ESP32 based controller for a 32x32 RGB LED matrix, controlled from Node-RED over MQTT

IoT RGB LED Matrix Controller (ESP32)

Takes 3D surface scans at close range. It is simple to construct as it uses off the shelf hardware and software.

3D scanner

Can we build a great board for under $400 in less than 3 weeks? (using a few pre-made kit parts)

Electric Longboard

The 2017 Hackaday Prize

An Arduino clone based on a TI's Tiva TM4C123G (An 80Mhz ARM M4F with USB OTG)

Roadrunner (the Arduino-Tiva)

The 2016 Hackaday Prize

The garden squid is an open platform for indoor garden automation to bring software, hardware, and garden hackers together!

Garden Squid

Christine Banek

Program ESP2866 with Visuino to flash a LED

Blink with ESP8266 and Visuino

The 2016 Hackaday Prize

ESP8266 Arduino WiFi Thermometer - 0.25 degree C accuracy. View temperature online.

My WiFi IoT thermometer

A device that enables multi axis control in a single hand, with a form factor optimized for drone flying

Six axis joystick

Lora Solution Based on Arduino

Maduino Lora(433M/868M)

Using OpenCV and 6 x Raspberry Pi to detect if rooms are occupied and them turn on and transfuse media to the relevant OpenElec frontend.

Media Center automation

The 2016 Hackaday Prize

Improve current locator technology for injured/trapped firefighters in buildings.

Improving Firefighter Safety

System on a chip (SOC) on a Raspberry Pi Hat

RPPSOC - System on a Chip for the Raspberry Pi

land-boards.com

RobotDigg Kossel 3D Printer setup

RobotDigg Kossel 3D Printer Kit Tutorial

Development of our 3D printed opensource DIYbio centrifuge V.2 and onward.

Opensource 3D Printed DIYbio Centrifuge V.2+

This project will hack simple LED Garden Light powered by small solar panel, enabling it to provide temperature, humidity real time data.

Smart LED Garden Lights

This is about sending tweets using IFTTT. Python code runs on LiV Pi. LiV Pi is a Raspberry Pi based indoor air quality monitor.

IFTTT and Raspberry Pi: LiV Pi uses IFTTT to tweet

AlfredC AlfredC

View all

Bits