0%

0%

Hako

I am a beginner to programming with endless interest and hacking and hardware development especially for wearable devices.

India

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

GitHub

This user joined on 09/25/2019.

Projects I Like & Follow

Hackaday Prize 2019

A powerful, compliant actuator for legged robotics

OpenTorque Actuator

Creating a break-out board for the ATtiny1616 where sketches can be uploaded from Arduino with the Arduino UNO or a modified AVR JTAG ICE

ATtiny 1-series with Arduino support

sander-van-de-bor Sander van de Bor

The 2018 Hackaday Prize

Unhappy with the ESP32-WROOM module, I designed an ESP32 D2WD module to ease custom board assembly and enable small, wearable ESP32 devices

Small ESP32 Module for Easier Custom Design

kris-winer Kris Winer

The 2018 Hackaday Prize

Publys is an open source platform for the study and processing of bioelectric signals.

Publys: An open source biosensing board

The 2017 Hackaday Prize

A low cost, open-source, universal-like remote control system that translates the user's head poses into commands to electronic devices.

TV Remote Control based on Head Gestures

cassio-batista Cassio Batista

The 2017 Hackaday Prize

Control your mobile device remotely without using the touch screen

Tactile Remote Control of a Mobile Device

kyle-thomas Kyle Thomas

Hackaday Prize 2019

Open-hardware bicycle compass

Aurora Bike Compass

andr-biagioni André Biagioni

The 2018 Hackaday Prize

An IoT Air Freshener, using some 3D printing, a NodeMCU, Arduino IDE, IFTTT and Adafruit.IO. Configure your own triggers and have fun!

IoT Air Freshener

Step-by-step instruction on running Dropbox on Raspberry Pi using ExaGear Desktop

Run Dropbox on Raspberry Pi

Home automation center, in a thermostat form.

Smart Thermostat

Hardware Hacking of Accu-Chek Performa Insight

Hardware Hacking of Accu-Chek Performa Insight

EthicalHacker523

Ultrasonic distance monitoring using HC-SR04 sensor, Arduino WiFi and AskSensors IoT cloud

Distance monitoring with Arduino & AskSensors IoT

The 2017 Hackaday Prize

a flexible controller based on the ESP32

HIVE

The 2018 Hackaday Prize

The Firefly is a DIY $5 hardware wallet for the Ethereum blockchain, with a secure air-gapped solution that is mobile-friendly.

Firefly Hardware Wallet

richard-moore Richard Moore

256-channel data acquisition system (DAS) to provide a bio-potential reading in the 0.4Hz-500kHz frequency range using a flat panel detector

Bio Balance Detector

andras-f Andras F

The 2018 Hackaday Prize

I was bored with synthesizers, but still wanted to make electronic music. So I build a lot of techno music robots!

Making Techno with Music Robots

moritz-simon-geist Moritz Simon Geist

In this new Bluetooth Head mounted display we hope to make it sleeker, slimmer, and better looking!

Bluetooth Head Mount Display Rev. 2

A power outlet whcih can be controlled from internet, developed around WeMOS

IOT Enabled Power Outlet using WeMOS

bikash-narayan-panda Bikash Narayan Panda

View all

Bits