Close
0%
0%

Saeed

A nerd at heart with an outer shell of extrovert personality.

Malaysia
Following
Send a private message
Similar accounts worth following
1 Followers
31 Following
0 Projects
0 Likes
saeed
Send a private message

This user joined on 06/17/2021.

10.8k
1.3k
11
28
My goal is to design a 3D printed standalone speaker based on transmission line theory - info: Martin J. King - http://www.quarter-wave.com/
Project Owner Contributor

3D printed Bluetooth speakers - LittleJet!

davide-ercolanoDavide Ercolano

9.1k
87
8
79
A jumperless breadboard
Project Owner Contributor

breadWare

kevin-santo-cappuccioKevin Santo Cappuccio

7.9k
649
11
47
Low cost ventilator for standalone use during the Covid-19 pandemic
Project Owner Contributor

Low Cost Ventilator

erik-wachlinErik Wachlin

4.6k
2.1k
0
30
A companion for your cats and dogs.
Project Owner Contributor

Zakhar the Robot

andrei-gramakovAndrei Gramakov

3.1k
2.9k
1
11
A first attempt for a small, attractive and practical soldering station, a project designed not by the cost but rather the experimentation.
Project Owner Contributor

AVR Soldering Iron

manosManos

2.4k
1k
0
1
Control 8 relays with WiFI + Bluetooth + Manual Switch using ESP32 and Blynk App. Explained with circuit & source code.
Project Owner Contributor

ESP32 WiFi + Bluetooth + Manual control 8 relays

subhajitSubhajit

2.4k
2.4k
0
15
Experimenting with 3D printed tools.
Project Owner Contributor

3D Printed Opensource Tools

progressthProgressTH

2.2k
2.2k
0
3
Create a home automation gateway, you can access from anywhere, using a Raspberry PI, Sonoff switches with Tasmota and FlashLex.
Project Owner Contributor

Internet Accessible Home Automation with Sonoff

clay-grahamClay Graham

1.9k
1.9k
2
13
The intent behind the Ultra Servo is to give a maker or a robotics a powerful building block.
Project Owner Contributor

Ultra Servo V2.0

patchartrandpatchartrand

1.9k
1.8k
1
5
This smart relay can sense the room temperature and sunlight to turn on and off the fan and light bulb. You can monitor the same from mobile
Project Owner Contributor

IoT Based Home Automation With Blynk and NodeMCU

subhajitSubhajit

1k
1k
0
8
A modular design for a soft robotic molds.
Project Owner Contributor

Soft Robotics Modules

nelson-phillipsNelson Phillips

998
987
0
3
In this project, I upgraded my 3D printer to be able to capture time-lapses of the prints without any additional electronics.
Project Owner Contributor

3D Print Time lapses Without Octoprint

setcreatesetCREATE

887
882
0
1
This project is about building your own stopwatch using the Arduino board and a few other components.
Project Owner Contributor

Arduino Stopwatch

hiotronhIOTron

715
696
2
3
Ultra Mobile PC - using Raspberry Pi, Nec MobilePro and 3d print
Project Owner Contributor

Raspberry Pi - UMPC

karolKarol

642
627
0
2
Simple pcb module for PICkit2
Project Owner Contributor

PICkit2 to AVR/Flashrom (SPI) adapter

baigeorgiBaiGeorgi

614
732
1
16
Print-at-home robot hand kits inspired by animatronic creature effects and puppetry. 100% 3D printed, snap-fit kits for FDM PLA
Project Owner Contributor

3D Printed, Animatronic-Inspired, Robot Hand Kits

chris-boyntonChris Boynton

528
519
0
2
We built a robot that can be controlled with IoT or with light sensors.
Project Owner Contributor

Tokymaker - IoT Robot

tokylabsTokyLabs

300
298
0
1
Upgrading the Retro LED-Beamer with a Raspberry Pi and Raspicast center (and temperature control)
Project Owner Contributor

Retro LED-Beamer with Raspberry Pi/RaspiCast

stephan-goedeckeStephan Goedecke

View all

Share this profile

Share

Bits

Send a private message to Saeed

Become cool instantly

Create your Hackaday.io profile like Saeed and many others

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday

Report user as inappropriate

You are about to report the user "Saeed", please tell us the reason.