0%

0%

Thogul

Idk who i really am.... so imma say no for now

Norway

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

Twitter

This user joined on 08/28/2020.

Projects I Like & Follow

A portable, rugged, self-contained system to suit all your RF SIGINT needs in every environment.

Raspberry Pi SDR Cyberdeck

Low cost ventilator for standalone use during the Covid-19 pandemic

Low Cost Ventilator

Hackaday Prize 2020

a safe, low-cost IV fluid warmer solution; for when commercially available IV fluid warmers are too expensive or cannot be sourced

OpenFluidWarmer

Experimental case testing 3D printed "waterproofing" and water resistance.

Water Resistant 3D Printed Enclosures

FFT spectrum analyzer is an test equipment that uses Fourier analysis and digital signal processing techniques to provide spectrum analysis.

DIY FFT Audio Spectrum Analyzer

mircemk mircemk

More than an Arduino

Bittino

A "Nanodrone" for environmental data collection and a Ground Control PSoC6 to interface the data to the cloud.

Nanodrone For IoT Environmental Data Collection

A project to understand and repurpose a low cost night vision IP camera.

iNite Night Vision Camera Reverse Engineering

Amplified nRF52832 development board featuring 30x higher (!!!) transmission power than a regular nRF52832. AND it is Arduino compatible!

N32 Long range Bluetooth development board

Nikolaj Andersson Nielsen

Build a portable all inclusive platform for (IT/ICS/OS/Rad/WiFi) network troubleshooting, testing, scanning for remote sites/industrial.

NETWORK HUTT

The ultimate machine: There is something unspeakably sinister about a machine that does nothing—absolutely nothing—except switch itself off

The intelligent rebounced RCX switch

Security is a major concern so we have designed a door alarm system to recognize the presence of anybody at the door

Door Alarm using Arduino

hIOTron hIOTron

Hackaday Prize 2020

Using Machine Learning to simplify Twitch Chat interface for my tvhead and OBS Scene Control

Gesture Recognition Wearable

I developed Freedom Shield to protect the rights of individuals to peaceably assemble and petition their government.

Freedom Shield

This project is a spreadsheet to help design enclosures for 3D printers.

3D Printer Enclosure Design Spreadsheet

We will connect LED to NodeMCU and write a simple program that will make LED blink every second.

Starting With NodeMCU Blinking LED - PlatformIO

My high school project

Torque controlled robotic arm (2)

Since i could not establish to display the time on this, it shall be a dB-Meter with (no MEMS - it broke) microphone.

Audio dB-Meter - on diy POV-HDD-Display

View all

Bits