0%

0%

YourAverageMaker

I'm just your average maker. I don't have a degree in engineering, rarely know what I'm doing, but I like to make things.

USA

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 02/03/2023.

My Projects

Is it a Ghost Sensor? That depends on if there are ghosts. It is definitely an environmental sensor and thermal camera in a 3d-printed case.

Ghost Sensor

YourAverageMaker

Projects I Like & Follow

Creating a break-out board for the ATtiny1616 where sketches can be uploaded from Arduino with the Arduino UNO or a modified AVR JTAG ICE

ATtiny 1-series with Arduino support

sander-van-de-bor Sander van de Bor

Hackaday Prize 2019

Demonstration robot for learning principles of real-time control using Raspberry Pi, RT Linux, and ROS.

Bobble-Bot

mike-moore Mike Moore

Motivation to do some software projects by writing them down.

Silly software wishlist

lion-mclionhead lion mclionhead

An Open Source Continuous Inkjet Printer

CIJ Printer

dominik-meffert Dominik Meffert

RGB LEDs Triangular/Hexagonal Pixels Matrix.

RGB HexMatrix | IOT Clock

mukesh-sankhla Mukesh Sankhla

Too simple for a project page & which may never happen.

Silly hardware wishlist

lion-mclionhead lion mclionhead

Setup a 433 MHZ transmitter/receiver with the Raspberry Pi for Home Assistant use

Raspberry Pi 433MHz RF Transmitter/Receiver

Supplyframe DesignLab: 2022 Hackada…

Wireless USB dongle (868MHz) for home automation to improve the indoor air quality (IAQ)

Fresh air automation by RF usb dongle

An electro-mechanical Valentine Day automaton with an 18 layer heart.

A 3D Printed Valentine For My Wife, With A Twist.

greg-zumwalt Greg Zumwalt

M-BUS HAT to extend your Raspberry Pi with smartmetering functions

M-BUS HAT for Raspberry Pi

Deep Learning on the edge is now possible with lightweight computing hardware such as the Raspberry Pi 4 using TensorFlow Lite!

Object Detection on the Raspberry Pi 4

ecd1012 ecd1012

Track lateral and vertical movements of a 3D printer via AprilTags. Then, get informed of malfunctions related to motion via Telegram.

IoT 3D Printer Motion & Status Tracker w/ Telegram

kutluhanaktar kutluhan_aktar

Make an IoT-based ESP32 Alexa Home Automation to control 1 Fan & 4 home appliances with the Amazon Alexa, IR remote. Bluetooth & switches.

ESP32 Alexa Home Automation With Amazon Echo Dot

This is a ESP32 dev kit v1 bluetooth based controller that can be used with ROS, its rechargeable, has buttons, joystick and 9 dof IMU.

[2020] ROS bluetooth controller [prototype]

maximiliano-rojas Maximiliano Rojas

In this project, we are going to measure the current using ohm's law.

Digital Ammeter Using Arduino

hiotron hIOTron

An old-school style electronics lab to learn about transistor-based logic gates.

Transistor Logic Gates Lab

Supplyframe DesignLab: 2022 Hackada…

A self-watering and self nutrient feeding tomato hydroponics apparatus with live monitoring and environmental data analytics.

Advanced Hydroponic Garden of Eden - IoT

uncle-toby-and-aquaman Uncle Toby and Aquaman

open source (both software and hardware) tutorial about to build your own Radio Alarm Clock

Radio Alarm Clock

core-weaver core weaver

View all

Bits