0%

0%

ericmitc

A mechanical engineer with a passion for electronics and computer science. I spend my time repairing and hacking electronics

Berlin, GER

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 02/07/2018.

Projects I Like & Follow

Low/zero cost upgrades for the Monoprice Select Mini 3D Printer.

Monoprice Select Mini Maximum 3D Printer Mods

us-water-rockets U.S. Water Rockets

The 2017 Hackaday Prize

A WiFi fidget spinner, taken from concept to ordering parts in one weekend

IoT POV Fidget Spinner

The 2016 Hackaday Prize

Integrating open source autopilots from drones into massive pieces of farm equipment to do something useful.

Autonomous Tractor

matt-reimer Matt Reimer

A Wi-Fi controlled remote control car with camera

WiFi controlled RC Car

Be able to make & upload MagSpoof with variable tracks, to use it without Arduino dependencies, and implement it on the same Raspberry GPIO.

MagSpoofPI

salvador-mendoza Salvador Mendoza

Super tiny, Micro clock using a Numitron as its display. Running off a 400mAh lipo battery.

Micro NumiTron clock

jeremy-g Jeremy g.

Software Defined Radio (SDR) is the wonder child of our times. This project is about understanding, designing, building & playing an SDR.

Do a Real Magic Spell: "Essdeeaar!"

In this new Bluetooth Head mounted display we hope to make it sleeker, slimmer, and better looking!

Bluetooth Head Mount Display Rev. 2

If you want accurate time stamps for your application when your Raspberry Pi boots without being connected to the network, you need a RTC.

Raspberry Pi : DS3231 Real Time Clock

alfredc AlfredC

Connect your Arduino Uno to a PAL16L8 programmable logic chip, to test that the PAL16L8 is outputting the correct signals.

Arduino vs PAL16L8

The 2016 Hackaday Prize

I’ll demonstrate how to drive a variable speed fan with Snap Circuits and the Kano Computer.

Variable Speed Fan: Snap Circuits, Kano Computer

steve-schuler Steve Schuler

Control and Status from anywhere a Celair Evaporative Airconditioner

Swampy IoT Controller

justinrichards justin.richards

Gets attention, tells time, promotes knowledge of the electronics hobby & DIY/STEM in general, and advertises my local hackerspace a bit

A simple non-bomb clock or two

ESR (Equivalent Series Resistance) meter measures ESR of capacitors in circuit and displays on a 10 LED bar graph meter. www.HecKits.com

ESR METER

darrel-heckendorf Darrel Heckendorf

The 2018 Hackaday Prize

A practical capacitor meter that can simultaneously measure the equivalent series resistance and the capacitance of a capacitor in-circuit.

ESR and Capacitance Meter

This project replaces the paper on the back of a restroom door with an RPi Zero to make easier the control of restroom maintenace

Restroom maitenance log automation

mauro-pichiliani Mauro Pichiliani

The 2016 Hackaday Prize

Hammering your way through space

Thor Space Propulsion

An approach to get computers to tink in a human like manner

Think Deep

View all

Bits