0%

0%

Gaurav Garg

I am a mechanical engineer who loves to build new things.

haryana, india

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

GitHub

This user joined on 05/14/2020.

Projects I Like & Follow

The 2016 Hackaday Prize

A project about Home Automation. I want to replace my old thermostat with an IoT ESP8266 + OLED 128x64 Screen + OpenHab + MQTT + Micropython

Home automation: thermostat with ESP8266 & OpenHab

The 2015 Hackaday Prize

Arduino connects to the TX line (of a router, RPI) and display serial data on smartphone over WiFi

Hardware serial port monitor with WiFi

The 2017 Hackaday Prize

Creating a four legged robot with a running bound gait.

Mr. Runner

alex-martin Alex Martin

I am building an automated aquarium controller to fit into my home automation system.

Aquarium controller / home automation

Official Hackaday Prize Entry

We've connected our entire apartment, DIY style.

Practical Home Automation

fabricateio Fabricate.IO

Home automation using the Loxone series of home automation products along with hacks to extend functionality and reduce cost

Commercial home automation

ian-norton Ian Norton

The 2016 Hackaday Prize

Real-time machine-vision based detection of elephants in rural areas: providing warnings to locals and thus prevent human-elephant conflict

Automated Elephant-detection system

neil-k-sheridan Neil K. Sheridan

The 2016 Hackaday Prize

Autonomous intelligent IOT nodes connected to the home network, controlled via simple IFTTT style rules, configured via web interface

WiFi Based Distributed IOT Home Automation

A software interface for the breadboard. Configures your prototypes without wires or other components.

The MetaBoard

The 2015 Hackaday Prize

An inexpensive and more accurate GPS receiver accessory for Nikon D3100 (and compatible) cameras.

GPS Receiver for Nikon D3100 Cameras

The 2017 Hackaday Prize

The Archelon ROV is a low-cost, environmentally friendly Remotely Operated Vehicle (ROV) that helps to alleviate marine contamination.

Archelon ROV

ascendtechrobotics ascendtech.robotics

A small board to do all kind of automation stuff only with an ESP8266 - 07

ESP-07 Home Automation Hub

Ease and cheap Traffic Counter

Traffic Counter - Road Tube

kris-temmerman Kris Temmerman

Working with RFID is so much fun, you can do alot with these tags like controlling relay, turing lights on off, access control, door lock

Arduino RFID Shield

bhaskaranil430 bhaskar.anil430

The 2016 Hackaday Prize

glowy cubes (ws2812b) made from frosted acrylic with web service to easily find it on your network.

rgbcubes - iot finder

christian-stveken Christian Stöveken

This article summarizes how to connect your ESP32 WiFi module to the AskSensors IoT cloud

How to connect ESP32 to the IoT cloud

The Icarus is a FeatherWing-compatible (Feather) board with the nRF9160, made for easy cellular IoT development.

Icarus IoT Dev Board nRF9160 (LTE-M, NB-IoT, GPS)

The 2018 Hackaday Prize

A modular design for a soft robotic molds.

Soft Robotics Modules

nelson-phillips Nelson Phillips

View all

Bits