Close
0%
0%

Grace Jiang

h

Following
Send a private message
Similar accounts worth following
1 Followers
32 Following
0 Projects
0 Likes
grace-jiang
Send a private message

This user joined on 02/08/2019.

112.3k
1.2k
105
387
A powder and inkjet 3D printer based on HP45 inkjet technology
Project Owner Contributor

Oasis 3DP

yvo-de-haasYvo de Haas

94.5k
843
112
598
A high speed and high torque robotic actuator using low-cost brushless motors, custom controller, 3D printed parts and bearings.
Project Owner Contributor

3D Printed Robot Actuator

paul-gouldPaul Gould

50.4k
566
1
252
Follow this project to learn how to use FPGAs and incorporate them into your projects.
Project Owner Contributor

The Hobbyists Guide to FPGAs

luke-valentyLuke Valenty

49.8k
454
22
323
An open hardware-software framework based on inertial sensors that anyone can use to build a human motion capture system.
Project Owner Contributor

Motion Capture system that you can build yourself

bruno-laurencichBruno Laurencich

39.2k
3.6k
15
348
A low-cost, high-performance bipedal walking robot
Project Owner Contributor

Blackbird Bipedal Robot

gabrael-levineGabrael Levine

25.6k
264
5
249
The slightly different USB peripheral
Project Owner Contributor

pcbtc (GaN edition)

lucy-fauthLucy Fauth

20.7k
6k
10
75
The development of a dedicated hardware MIDI controller for the Turnado audio FX software plugin.
Project Owner Contributor

Turnado Hardware MIDI Controller

liam-laceyLiam Lacey

14.8k
136
29
194
It is compatible with standard stepper motor diver, cnc or GRBL shield, direct replacement of X-Y stepper motors.
Project Owner Contributor

2D stepper motor etched on PCB - micro manipulator

bobriciusbobricius

12.8k
1k
17
148
Very simple Tesla Coil - 3 components only = LED, BUL45D2G transistor and 82K resistor
Project Owner Contributor

Easy Open Tesla coil on PCB

bobriciusbobricius

8.7k
8.5k
10
155
Small magic pcb for moving miniature cars, trains or satellites :-)
Project Owner Contributor

Ant highway - linear motor for micro cars

bobriciusbobricius

5k
60
6
52
A simple network-attached OLED display for showing...whatever.
Project Owner Contributor

ESP8266 Network Display

tom-nardiTom Nardi

3.6k
857
5
56
To summarize, our goal is to create a abordable and portable x-ray micro-CT scanner in OpenSource.
Project Owner Contributor

X-RAY micro-CT SCANNER OPEN SOURCE

berry-phoebeBerry Phoebe

3.4k
42
4
43
A DIY flexible keyboard project; instead of using silicone, a SLA highly flexible resin is used.
Project Owner Contributor

DIY Flexible keyboard without using silicone

madaeonMadaeon

2.2k
2.2k
1
11
Uses multiple Arduino Nano and a passive mixer to generate multiple voices simultaneously.
Project Owner Contributor

Rachel's Nightmare, a distributed polyphonic synth

arduino-enigmaArduino Enigma

1.7k
1.7k
2
26
I was bored with synthesizers, but still wanted to make electronic music. So I build a lot of techno music robots!
Project Owner Contributor

Making Techno with Music Robots

moritz-simon-geistMoritz Simon Geist

1.6k
1.6k
0
6
An open source, Arduino-based oceanographic instrument for salinity, temperature, and depth.
Project Owner Contributor

Arduino-based CTD

ian-blackIan Black

1.6k
1.5k
0
52
The project focuses on an open source design of a gripper with tactile sensor system for robotic hands and exoskeletons
Project Owner Contributor

Open source Tactile sensor enabled robotic gripper

aman-gargAman Garg

1.2k
1.2k
2
6
A 3D-Printed, Animatronic, Karaoke-Singing Robot
Project Owner Contributor

KARAOKEBOT

hunter-irvingHunter Irving

View all

Share this profile

Share

Bits

Send a private message to Grace Jiang

Become cool instantly

Create your Hackaday.io profile like Grace Jiang and many others

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday

Report user as inappropriate

You are about to report the user "Grace Jiang", please tell us the reason.