Close

Your browser (Internet Explorer) is out of date.

Update your browser for more security, comfort and the best experience on this site.

Update Internet Explorer'

Projects Anders Nielsen likes and follows

99.6k
1,391.6k
2.2k
Follow for the 'Hacklet' and latest news about hackaday.io
Project Owner Contributor

Hackaday.io Project

lutetiumLutetium

30.3k
14.9k
189
This project is a clock with radio receivers which can receive the exact time from the GPS satellites or from the DCF77 transmitter.
Project Owner Contributor

"Connect" to an atomic clock in space! GPS, DCF77

hkdcsfhkdcsf

165.4k
14.6k
356
Developing a small fuelless microwave thruster
Project Owner Contributor

EMDrive/satellite

paul-kocylaPaul Kocyla

15k
14.3k
163
tracking CubeSats faster, anywhere and anytime for everybody!
Project Owner Contributor

The Distributed Ground Station Network

hornighornig

11.1k
11.1k
53
QubeCast Max is a high powered radio module for PocketQube Satellites, HAB payloads, or anything that needs a small radio transciever.
Project Owner Contributor

QubeCast Max

ozqubeOzQube

9.4k
9.1k
159
Small magic pcb for moving miniature cars, trains or satellites :-)
Project Owner Contributor

Ant highway - linear motor for micro cars

bobriciusbobricius

9.8k
8.5k
54
A small accelerometer, thermometer, altimeter, SD card logger, with a radio downlink. Does not include Kerbal life support.
Project Owner Contributor

Model Rocket Data Logger

mdasilvaM.daSilva

7.3k
8.2k
88
Neopixel watch with accelerometer.
Project Owner Contributor

Arduino Neopixel Watch

marcello-gravesMarcello Graves

25.8k
7.9k
81
RFID tags in the gloves control shoulder rockets pods, hip pods, forearm missile, back flaps and wireless helmet.
Project Owner Contributor

Animatronic Iron Man MKIII suit

jeromekeltyjeromekelty

9.6k
7.6k
50
BlackIce is the fusion of FPGA & ARM - a low cost open source hardware FPGA dev board bound together with innovative open source toolchain
Project Owner Contributor

BlackIce - Low Cost Open Hardware FPGA Dev Board

monsonitemonsonite

7.5k
7.6k
18
A monster flashlight containing a 100W 8500Lm led with big heatsinks and batteries. With morse function to tell the night goodbye.
Project Owner Contributor

Portable 100W led flashlight

yannick-gigawipfYannick (Gigawipf)

10.6k
6.5k
28
Too simple for a project page & which may never happen.
Project Owner Contributor

Silly hardware wishlist

lion-mclionheadlion mclionhead

11.4k
6.1k
99
Open-Source, easy to build IOT Dosimeter with sensors and Internet connectivity to centralise data.
Project Owner Contributor

Open Source IOT Platform

radu-motisanRadu Motisan

9.2k
6.1k
9
Use of solar panel and supercapacitor to enable an 3.3V 8MHz ATMega386P to function as remote IoT solution using LoRaWAN.
Project Owner Contributor

Solar & supercap charged LoRaWAN IoT device

pmbnlPMBNL

20k
6k
76
A DIY 3D printer (big volume, inexpensive, lightweight and portable).
Project Owner Contributor

RigTig's Big 3D Printer

rigtigRigTig

5.6k
5.8k
32
Tiny IOT Solution based on Arduino& SIM808 GPS/GPRS
Project Owner Contributor

IOT- SIM808 GPS Tracker Based on Arduino

makerfabsMakerfabs

5.3k
5.4k
16
This projects converts a Bobby-Car (children's ride-on toy) to electric by using 4 Hoverboard motors, VESC controllers and an ESP32
Project Owner Contributor

Electric Bobby-Car

peter-ptziPeter Pötzi

13.5k
4.5k
54
Probability this can work: 98%, working well: 50% A LOT of work, and utterly ridiculous.
Project Owner Contributor

Improbable AVR -> 8088 substitution for PC/XT

eric-hertzEric Hertz

5.2k
4k
12
Use your Wemos motor shield with steppers motors I2C custom slave interface
Project Owner Contributor

WEMOS Motor Shield firmware for steppers (I2C)

angeloteAngelote

3.3k
3.2k
20
Easy to use Arduino Uno Shield to support your rockets from the ground!
Project Owner Contributor

WOOF Model Rocket Launchpad Computer V4

canine-defense-technologiCanine Defense Technologi

8.5k
3.2k
10
How I added a 500W heater to my 3D printer to enable reliable ABS printing.
Project Owner Contributor

Enclosure Heater for 3D Printer

mark-rehorstMark Rehorst

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2025 Hackaday