0%

0%

kelly mahoney

When I grew up, if we couldn't afford it, we built it. We were poor farmers. We built a lot!

Starbuck, MN

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 05/01/2019.

Things I've Built

Homemade snowplow and receiver for my Ford Ranger

I started wtih bed frames, a harbor freight wench, and welder, but eventually bought some better metal at my welding shop. It's been a great tool for MN winters!

Projects I Like & Follow

Follow for the 'Hacklet' and latest news about hackaday.io

Hackaday.io Project

Cheap, Small, Open Source Servo Controlled Robot Arm

MeArm - Your Robot

benphenoptix ben.phenoptix

Breaking the encryption on the Lerdge series mainboards so I can try porting Marlin 2.0 to it.

Lerdge 3d Printer Mainboard Hacking

jc-nelson J.C. Nelson

Motors and controllers can be salvaged from scrapped washing machines. This project delves into reusing the motor controller too.

Variable speed washer motor and controller reuse

75x40 mm, 6 layer PCB, Xilinx XC7Z7010 FPGA, dual core ARM Cortex-A9, 32Mbyte Flash, SD, microSD, Bluetooth, 100 mil headers, single 3.3V

Open Source HW: Xilinx ZYNQ7000 System on Module

antti-lukats Antti Lukats

open hardware 2 GHz to 13 GHz two-port vector network analyzer

Vector Network Analyzer

jon-klein Jon Klein

I was always fascinated by delta robots. So I built one.

Delta robot "deltaR"

malte-ahlers Malte Ahlers

The 2016 Hackaday Prize

Designing hardware is difficult. We Have a hardware platform that generates schematic and layout design files in a typical 10 minutes time.

Simplify Embedded hardware designs

makarand-kapoor Makarand Kapoor

CAN Bus Arduino Clone

Take an small robotic arm (MeArm) and a dev board with more processing power than necessary (Jetson TX2). What could go possibly go wrong?

Ty the Typing Robot

elecia-white Elecia White

The 2017 Hackaday Prize

This is a easy-to-build Segway with Arduino Nano.

Arduino Segway

vincius-jean-ferreira Vinícius Jean Ferreira

An open source, Arduino-based oceanographic instrument for salinity, temperature, and depth.

Arduino-based CTD

ian-black Ian Black

An open source magnetic encoder with multiple interfaces and configurations. Designed for robotics and motion control applications.

OpEncoder

Bits