560 Results for "《 예약문의 OIO≡⑧④89≡83O⑥》강남레깅스룸ⓨ강남레깅스룸singing강남레깅스강남레깅스룸강남레깅스룸remainder 강남레깅스㉮┢선릉레깅스agitation"

Single Chip AVR BASIC Computer
Instructions from Single Chip AVR BASIC Computer
Required Components:The component list for this computer is fairly low as only a single IC is required: 1 x ATmega 1284P Microcontroller 1 x DIL 40 Pin 0.6" IC Holder 1 x 40 Pin Female Pin Header (to be cut down into smaller headers) 1 x 16 MHz Crystal...

ramanPi - Raman Spectrometer
Instructions from ramanPi - Raman Spectrometer
Below is a list of build instruction logs that will instruct you on how to go all the way from sourcing your components to printing the parts, and constructing your very own raman spectrometer!To begin, you will need some tools.. Pretty much every...

ZRTP Hardphone
Instructions from ZRTP Hardphone
### [ OVERCLOCKING AND MEMORY CONFIG ]# Grow the partition# Set locales# Set hostname# Set Overclock to Turbo# Set Advanced Options > Memory Split to 16Reboot? yes

Lexitron RSS Reader
Instructions from Lexitron RSS Reader
Lexitron circuit design and hardware:LED display: The display is constructed using Red 8x8 square LED matrix displays, each containing 64 LEDs wired in a square grid with the 16 column and row pins available out the base. It is designed to be used in...

Lexitron RSS Reader
Instructions from Lexitron RSS Reader
Tickernut construction log:Construction was completed in stages over the period of many months with a design that evolved to suit the available parts. The progression of construction was arranged so that each stage could be completed and tested...

ROSCOE - A Scalable, Platform Independent Robot
Instructions from ROSCOE - A Scalable, Platform Independent Robot
Mechanical:There are special application 16 inch 32 hole rims available at e-bike shops/online. Provide the hub and have the spokes cut to length. To build the wheel it is necessary to add the spokes all to one side, dished all the way in, add...

ROSCOE - A Scalable, Platform Independent Robot
Instructions from ROSCOE - A Scalable, Platform Independent Robot
Mechanical:For stabilization of wheels a carriage is constructed consisting of 5/8" stainless all-thread and a 16 inch BMX bike fork. 1) Drill 2 3/8" holes 1" from each end of the steerer tube.2) Bisect the fork longitudinally along the steerer...

1Charger
Instructions from 1Charger
Calibration1. #define CALIBRATION in software and recompile and flash ATtiny8612. For each range make two measurements in order to calculate the line v=k*ADC + m. With this simple approach I get about 10-20mV and 10-20mA accuracy ( compared...

ATX-Pi
Instructions from ATX-Pi
Step two: Place the R6 (1k ohm), R7 (10k ohm), the 16 MHz crystal (XTAL) and the 22 pF capacitors (C1/C2). Solder in place.

Window Fan Controller
Instructions from Window Fan Controller
// Temperature Controler for window fan// Written by mike, public domain/*-------------------------------------------------------------------------------------- Includes--------------------------------------------------------------------------------------*/#include...

DMX-84: Calculator-Controlled Lights
Instructions from DMX-84: Calculator-Controlled Lights
Ensure the Arduino IDE is setup to build for "Arduino Pro or Pro Mini (5V, 16 MHz) w/ ATmega328" and that the selected serial port corresponds to the FTDI.

DMX-84: Calculator-Controlled Lights
Instructions from DMX-84: Calculator-Controlled Lights
Using a drill press, drill the following holes in the enclosure: 7/8" hole centered on one one side of the enclosure for the XLR jack1/8" holes for the screw attachments for the XLR jack5/16" hole for the LED centered on the top of the enclosureTwo 3/16"...

FarmBot - Open-Source CNC Farming
Instructions from FarmBot - Open-Source CNC Farming
Electronics Assembly45 minutesThis is the estimated time it will take to setup the Electronics.Step 1: Setup the Raspberry PiFollow the instructions on the Raspberry Pi Software page to install the necessary software onto the Raspberry Pi.Step 2: Assemble...

RISC-V Instruction Set Architecture
Instructions from RISC-V Instruction Set Architecture
Install QEMU, a fast ISA SimulatorPrereqs: Linux or Mac OSXC compiler (gcc)Download the QEMU Source, either as a zip from Github, or using git:$ git clone https://github.com/ucb-bar/riscv-qemu.git Now, cd into the riscv-qemu directory and run the following....

RISC-V Instruction Set Architecture
Instructions from RISC-V Instruction Set Architecture
Build your own RISC-V Computer with a Zybo or ZedBoardHow it worksBoth the ZedBoard and the Zybo board contain Xilinx Zynq chips with an ARM processor tied to some programmable logic. We'll use the ARM core to bootstrap the RISC-V Rocket Core that we'll...

|<
<
1
2
3
4
5
>
>|