// Temperature Controler for window fan// Written by mike, public domain/*-------------------------------------------------------------------------------------- Includes--------------------------------------------------------------------------------------*/#include...
Ensure the Arduino IDE is setup to build for "Arduino Pro or Pro Mini (5V, 16 MHz) w/ ATmega328" and that the selected serial port corresponds to the FTDI.
Using a drill press, drill the following holes in the enclosure: 7/8" hole centered on one one side of the enclosure for the XLR jack1/8" holes for the screw attachments for the XLR jack5/16" hole for the LED centered on the top of the enclosureTwo 3/16"...
Electronics Assembly45 minutesThis is the estimated time it will take to setup the Electronics.Step 1: Setup the Raspberry PiFollow the instructions on the Raspberry Pi Software page to install the necessary software onto the Raspberry Pi.Step 2: Assemble...
Install QEMU, a fast ISA SimulatorPrereqs: Linux or Mac OSXC compiler (gcc)Download the QEMU Source, either as a zip from Github, or using git:$ git clone https://github.com/ucb-bar/riscv-qemu.git Now, cd into the riscv-qemu directory and run the following....
Build your own RISC-V Computer with a Zybo or ZedBoardHow it worksBoth the ZedBoard and the Zybo board contain Xilinx Zynq chips with an ARM processor tied to some programmable logic. We'll use the ARM core to bootstrap the RISC-V Rocket Core that we'll...
Here's the Arduino Code I am using on the Teensy. It's uses the Octows2811 library (https://www.pjrc.com/teensy/td_libs_OctoWS2811.html)/* LIGHTBAR By IAMTHESOUNDMAN - Based on: OctoWS2811 VideoDisplay.ino - Video on LEDs, from a PC, Mac, Raspberry Pi...
Solder wires from UBBB to LCD. (Note that uBBB pins are ordered as if looking at the bottom, since it also serves as a generic 32-TQFP breakout board if you flip it upside down). Specific connections are described below:-Connect pins 1, 5, and 16 on...
Installation on RaspbianThe Festival package is required for text to speech and WiringPi package is required for GPIO use.1. Update Pi and install git, festival, and wiringpi packageUpdate Pi"sudo apt-get update""sudo apt-get upgrade"Install Git on...
SettingsFor many settings 0 is OFF / 1 is ONDo not leave any line blank you must manually input all settings. Input the setting then press enter to proceed to the next setting.Callsign:Input your ham callsign. This is required by the FCC and is found...
This last step is going to get REALLY tedious because the Address Bus has so many lines. But this is the last step and you should be done, so keep it up just a little longer. A0: 6502 Pin 9 to FLiP pin 13 A1: 6502 Pin 10 to FLiP pin 14 A2: 6502...
Burn Raspbian to your SD card (this tutorial assumes you are familiar enough with a Raspberry Pi to do this. Follow the instructions at https://www.raspberrypi.org/documentation/installation/installing-images/README.md if you need help), boot the OS...
First, expand the file system. We will need that extra space for the world you are about to create. Next, change the password to whatever you want it to be. After that, change the International Options to reflect wherever you live and the appropriate...
Udate WS2812B, the HSVtoHex is from the top routine made by cnlohr ( the base for this hack )// https://github.com/cnlohr/ws2812esp8266/blob/master/user/user_main.c static void ICACHE_FLASH_ATTR procTask(os_event_t *events) { int i=0; uint32_t hex; //...