Close

23 Results for "%E3%80%8A%E3%80%88 %EB%AC%B8%EC%9D%98 OIO%E2%86%975793%E2%86%977458 %E3%80%8B%E3%80%89 %EC%85%94%EC%B8%A0%EB%A3%B8%EA%B0%80%EA%B2%A9%E3%85%B1 %E2%95%88proprietary%EF%BC%98%EC%85%94%EC%B8%A0%EB%A3%B8%ED%9B%84%EA%B8%B0%EC%85%94%EC%B8%A0%EB%A3%B8%EC%B6%94%EC%B2%9C%E3%83%B0amidst %EC%84%A0%EB%A6%89%EC%85%94%EC%B8%A0%EB%A3%B8%EC%85%94%EC%B8%A0%EB%A3%B8%EC%B6%94%EC%B2%9C %EC%85%94%EC%B8%A0%EB%A3%B8%EC%B6%94%EC%B2%9C%E2%80%BB%EC%85%94%EC%B8%A0%EB%A3%B8%EC%B6%94%EC%B2%9C%E3%84%B4handle%E3%8F%89"

  • Cree Dimming Level
  • Instructions     from Cree Dimming Level
  • Flash the Arduino with the following sketch. This is also included as a file attached to the project. int last_level = 0; bool last_state = false; bool stable = false; int count = 0; const int cutoffs[198] = {/* 1*/ 833, 831, /* 2*/ 825, 823, /* 3*/...

  • Geiger–Müller Tubes

  • Instructions     from Cosmic Array
  • I've had comments regarding the validity of using Geiger–Müller Tubes for a cosmic ray (muon) detector. Pointing out that Photomultipliers and scintillation panels are best, and yes the are far more effective. However, they are also expensive,...

  • Instructions
  • Instructions     from Budget DIY ESP32 GPS Base Station and Receiver
  • Best Budget DIY GPS/GNSS Base Station using the UM980 and a ESP32Introduction The ESP32 is a versatile microcontroller renowned for its WiFi and Bluetooth capabilities. In this guide, we’ll walk you through setting up the your ESP32 development board...

  • Instructions
  • Instructions     from DIY Ntrip Server and Reference Station Setup
  • DIY Onocoy Reference Station Setup GuideIn this guide, we’ll walk you through the process of setting up your own GPS Onocoy server using cost-effective hardware options and reliable GPS receivers. Whether you’re interested in enhancing the accuracy of...

  • Sigma Derby Clone
  • Instructions     from Sigma Derby Clone
  • Programming the finish switch Mega board)The finish switch Mega board will be the brains of the operation. It will come up with a 5 digit number to Serial communicate to the other boards. The 5 digit number will contain 3 pieces of information. The first...

  • Sigma Derby Clone
  • Instructions     from Sigma Derby Clone
  • Program the betting station)The betting station needs to know the odds of the current race to know what to pay out if you win. It also needs to know the race winner.Once again this is the fun version, so there is no code here for coin in, or cash out.#include...

  • Instructions
  • Instructions     from Bypassing the BGW-320: Using an Azores COTS ONT -
  • How to Bypass the BGW-320 and Using an Azores WAG-D20 Most people with fiber have two ways to connect to the internet - fiber to an ONT, Ethernet to a gateway or fiber directly to the gateway. In this article, we will focus on how to bypass the BGW-320...

  • Sigma Derby Clone
  • Instructions     from Sigma Derby Clone
  • Program odds display)The board will receive the same 5 digit signal as the other boards, and break out the first two digits to print the odds.Left 5 odds display:#include int h45odds = 0; int h35odds = 0; int h34odds = 0; int h25odds = 0; int h24odds...

  • Flashing the firmware
  • Instructions     from Oasis 3DP
  • For this step you will need the Arduino IDE, and teensyduino installed. HP45Connect the Teensy 3.2 on the HP45 board with USB to the PC. For the HP45 firmware, Open "HP45_Standalone_V3.00.00"  (or higher) from the make package->Firmware->HP45 in...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday