9245 Results for "3D%20printing"

3D Model
Instructions from Fl'Air
Detailed 3D models were prepared using Autodesk Fusion 360, mentioning details about the chassis design, hubs, wheels, suspension, various joints and bends. For the 3D model we used the dimensions of the wheels [rear and front] and suspension [shock...

3D Printing:
Instructions from RGB HexMatrix | IOT Clock 2.0
Click for STL files3D Print all the 3D models, make sure to print the screen in white PLA.The design I made is for hanging on the wall you can modify as per your requirement in Fusion360 Fusion360 file.

3D Printing
Instructions from Pico KeyPad
Download STL Files (Click) 3D Print the given 3D Models.Note: If you don't find the same Push Buttons as mine please design your own Keypad.Once the print is complete insert the pushbuttons and fix them with some quick glue.

3D Printing
Instructions from IOT WALLET (smart Wallet with Firebeetle ESP32)
You can download all the stl files on the following websites: https://www.thingiverse.com/thing:2886806 https://pinshape.com/items/45150-3d-printed-iot-sm... The whole print took me around 2h30, printed with 0.2 mm resolution and 10% infill. This is...

3D models
Log from A new high accuracy tilt sensor
We made some 3D models about the sensors and the resolution measurement test bench just to visualize them better. Here they are:Linear FCDT:Toroid FCDT:Resolution measurement test bench:

3D Model
Log from 4B Robot
This is 4B's first 3d model prototype. The main parts consists from a base, 4 coxa linkages, 4 femuer linkages and 4 tibia linkages. The base and femuer linkages houses the HK-5320 micro servomotor.Most of the robot's weight is positioned at the...

3D Modeling
Instructions from DIY Wi-Fi Smart Scale (with ESP8266)
The smart scale was desgined using Fusion 360 CAD software. The model is composed of three different 3D printed parts: cover, case and foot. The case provides an enclosure for the electronics, protecting them from physical contact. Electronics are attached...

3D Print!!!!!!
Log from SunSafe - A solar powered safety light
It is finally here!!!! Now I just need to fit all the parts, time to get the veroboard out.

3D Printing
Instructions from Hive Lamp
Print all the parts according to 3d-printing-assembly.pdf file.The resolution of the print is depends on your available time. The finer you print the better it gets and less sanding at the end.

3D model
Instructions from DIY Nanoleaf (Vrikxa)

3D models
Instructions from Wall-U
3D print the caterpillar tracks : we printed 40 pieces in total (20 for each side), 2 main wheels for the motors and 4 secondary wheels. We assembled the tracks using M4x25 screws and bolts. 3D print the arms and the mechanism that go with them....

3D Printing
Instructions from BrailleBot
To bring your BrailleBot to life, let's start by 3D printing the essential components. Follow these steps to create the physical structure of your BrailleBot: You can view BrailleBot design directly on your browser, download it, open it in Fusion...

3D Print
Log from Team TAHMO
As this is a very first attempt at 3D printing, the results are quite nice. We used a Da Vinci Junior 1.0A that uses PLA for its prints. The first time, the two halves of the box fitted nicely, as did all the 'innards' of the box. Some minor modifications...

3D modeling
Log from Nixie and Numitron Clock
I'm working on a 3D model of the clock in order to determine the style of the case, as well as the spacing of the tubes relative to one another. I had to start with the tubes and sockets and move on to the wood parts of the case. I intend to make the...

3D Modelling
Log from SnapBot
Next step is to model the entire robot to leave out any obvious mistakes. Sketchup is my preferred software for 3d modelling as it is simple to use and the availability of many pre-modelled components. The SketchUp file for the model is part of the files....

|<
<
3
4
5
6
7
>
>|