27106 Results for "《〈 문의 OIO↗5793↗7458 》〉 셔츠룸후기ð νeveningм셔츠룸후기선릉셔츠룸Ξthreshold 강남셔츠룸셔츠룸추천 셔츠룸후기シ셔츠룸후기㎩regular≡"

Open Indirect Ophthalmoscope
Instructions from Open Indirect Ophthalmoscope
The step by step build instructions for "OIO" can be found here: http://www.instructables.com/id/Open-Indirect-Ophthalmoscope-OIO/

Nixius
Instructions from Nixius
Solder everything together. SMD soldering isn't hard if you are afraid of that. Using solder paste and hot air will probably be faster than a regular soldering iron.

LED Beer Pong Table
Instructions from LED Beer Pong Table
Optional: Attach the regular LED strip to the inside of the frame on the underside using the included adhesive backing so they point in towards the cutout logo.

Programming
Instructions from LilyGO TTGO Watch
Supports the Arduino IDE, but you can program it using the command line too. The procedure is the same as for regular ESP32, that was the platform i was using for programming it.

Shrink pattern pieces
Instructions from bag hacking
I printed the pattern at 66% of regular size, cut out the pieces, and taped them together where necessary.

PolaPi
Instructions from PolaPi
The Raspberry Pi SD cardIf the adafruit PiTFT screen is used, all linux software steps are described here : https://learn.adafruit.com/adafruit-pitft-28-inch-resistive-touchscreen-display-raspberry-pi/easy-install Download the wheezy SD card image and...

Minimalistic AVR Programmer
Instructions from Minimalistic AVR Programmer
If you want to update the firmware on the ISP itself, you can do so via the ICSP header (obviously) or by temporarily enabling the RST-EN jumper and programming it via the FTDI like a regular Arduino.Make sure to remove the RST-EN jumper afterwards,...

Ping3D - The Next-gen Table Tennis Blade
Instructions from Ping3D - The Next-gen Table Tennis Blade
Project and Printing SetupBefore you get started, please make sure you have a few things:3D Printer (or 3dhubs)Minimum build plate 200mm x 200mmNinjaflex (any color)Regular PLA or ABS

Aeroponics Garden
Instructions from Aeroponics Garden
Do a regular check every 2-3 days to see if there is enough water in the bucket. The roots of the plant should not touch the water if possible. Try to keep a distance of at least 2-3 cm between the roots and the water.

TeensieWI woodwind USB MIDI controller
Instructions from TeensieWI woodwind USB MIDI controller
For connecting electrodes, solder small pieces of copper tape onto the stripped ends (4mm) of regular insulated copper wire for electronics. This is done very easily if you solder onto a longer piece of tape that is cut after the soldering.

Attach Gripper Fingers
Instructions from LittleArm 2C: 3D Printed Robot Arm
Place the Servo Actuated finger on the side of the servo. Secure with Gripper Pin screwPlace regular finger symmetrically to the Servo Actuated Finger and secure with Gripper Pin Screw.

Paint the case white
Instructions from Solar Powered Air Quality Monitoring Station (IoT)
In order to avoid yellowing from the sun and to better protect the case from the elements, you may want to give it a few coats of white paint. I used just regular spray paint

Program the Arduino Zero
Instructions from Controller Input Adapter
To upload the Arduino program to the Arduino Zero you need to export the CIA.zip file. The files from the zip folder need to be in a regular folder name "CIA". Then you need to open Arduino and upload the code to the programming port of the Arduino zero...

Browsing Web
Instructions from LATTEintosh DIY Mini PC
We can access websites by using a regular browser like chrome or edge, for testing I tried to open multiple tabs on chrome and browse each of them and the system worked without any lag

1
2
3
4
5
>
>|