Close
0%
0%

AKKing

Write an elevator pitch for yourself in 128 characters or less.

Shanghai
Following
Send a private message
Similar accounts worth following
1 Followers
52 Following
0 Projects
0 Likes
akking
Send a private message

This user joined on 09/05/2020.

32.6k
223
13
171
A fully 3D-Printable VTOL aircraft, designed as a hybrid fixed-wing plank + tricopter planform. For FPV and UAV experimentation.
Project Owner Contributor

MiniHawk VTOL

steve-carlsonSteve Carlson

24.2k
247
12
194
Mostly 3D printed HAWT windturbine incl. 3D printed disk-generator and brake system.
Project Owner Contributor

WinDIY - HAWT Wind turbine

fabianFabian

18.2k
195
11
188
Your 3D content on a real PoV volumetric display, no glasses needed!
Project Owner Contributor

VVD: an open source Real 3D Volumetric Display

madaeonMadaeon

16k
823
4
70
This radio receiver is capable of receiving all MW and SW bandwidth, and can also operate as an SDR receiver, so with the help of PC and app
Project Owner Contributor

DIY SW , MW , Retro look Radio with ESP32/Si5351

mircemkmircemk

9.4k
93
7
83
A versatile sensor platform with expansion and customisation capabilities [dev]
Project Owner Contributor

[HEX]POD - Climate Tracker & Digital Nose

ebendereBender

9.2k
2.8k
0
22
for demonstration of physical laws in generating electrical energy using hydropower plant
Project Owner Contributor

3D printed hydroelectric power plant model

matic-markoviMatic Markovič

9k
2.8k
8
40
Experimental case testing 3D printed "waterproofing" and water resistance.
Project Owner Contributor

Water Resistant 3D Printed Enclosures

progressthProgressTH

4.6k
1.4k
0
55
My 4 axis motion control rig
Project Owner Contributor

Motion Control Rig - 0.1.0

andyAndy

4.2k
50
4
45
This project focuses on the development of open-source, low-cost, waterjet-powered robotic speedboats for education and research
Project Owner Contributor

Low-Cost, Waterjet-Powered Robotic Speedboats

new-dexterityNew Dexterity

3.6k
1.7k
0
15
Octoshield is a Raspberry Pi shield to help with 3D printing and Octoprint.
Project Owner Contributor

Octoshield

goodwinGOODWIN

2.9k
722
1
25
Rethinking POV : what about 3D?
Project Owner Contributor

CyL3D

alexisAlexis

2.5k
23
0
22
This is certainly inspirational, I detail the full making steps of a cool glowing Magic LED Cube, all necessary files are included.
Project Owner Contributor

Glowing RGB LED Magic Cube (WS2812)

diy-guy-chrisDIY GUY Chris

1.9k
1.4k
0
86
An IoT based solution to secure office-spaces against fire and burglary
Project Owner Contributor

Watchmen Invisible

metheleshghosh80metheleshghosh80

1k
1k
2
12
This is a robotic arm that will be able to paint paintings, it is made from cardboard, scraps, and Servos (quarantine project).
Project Owner Contributor

Robotic Painting Arm (made from cardboard)

weffWeff

617
292
4
5
A simple design of a signal booster that can be used to extend the GSM frequency.
Project Owner Contributor

GSM SIGNAL BOOSTER v1.0

tiagoTiago

517
291
0
9
Device that makes the normally-invisibile world of RF audible.
Project Owner Contributor

All-Band Receiver

adam-demuriAdam Demuri

385
382
1
3
Make a simple DIY Arduino Smart Home System that can control electrical appliances such as lights, fans, gates, etc using your mobile phone!
Project Owner Contributor

DIY Smart Home Arduino

jithin-sanalJithin Sanal

120
2
0
2
ESP32 based sensor suite monitoring the air quality by using parameters like co2, voc, particulate matter and radiation.
Project Owner Contributor

AirQual

johannes-v-grundherrJohannes v. Grundherr

View all

Share this profile

Share

Bits

Send a private message to AKKing

Become cool instantly

Create your Hackaday.io profile like AKKing and many others

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday

Report user as inappropriate

You are about to report the user "AKKing", please tell us the reason.