0%

0%

Fab

Full time nerd in a world with too many projects for too little time

Germany

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 03/15/2018.

My Projects

Hackaday Prize 2020

Mostly 3D printed HAWT windturbine incl. 3D printed disk-generator and brake system.

WinDIY - HAWT Wind turbine

Hackaday Prize 2020

This is a mostly 3D printed disk generator build from 40 neodymium magnets and 12 self made coils

Nerdiskerator - A 3D printed disk generator

Hackaday Prize 2020

This small vacuum chamber made of 3D printed parts helps to pull the air bubbles out of epoxy molded parts.

DIY Vakuum chamber

A multifunctional smartHome display and notification system powered by EspEasy

pxlBlck - An IOT/SmartHome notification system

Hackaday Prize 2020

WinDIYingThing is a side project that helped me to wind the coils for the generator that i'm using with "WinDIY" a 3D printed wind turbine

WinDIYingThing - Automatic coil winder

A 3D printable servo controllable butterfly valve for my air filter system

3D printable 125mm butterfly valve

View all 10 projects

Projects I Like & Follow

An improved version of my first gauss rifle.

Gauss rifle v2.0

Leandro Leandro

Hackaday Prize 2020

An almost completely 3D-printed servo which is able to pull a car forwards.

3D printed high torque servo/gearbox Version 2

A maker friendly capstan based BLDC driven quadrupedal robot. Based on mjbots electronics

Stanley - the capstan based quadruped

Damian Lickindorf

(Working Title)

Concrete Physics Clock

A Wordwatch using a 11x10 charlieplex matrix.

Word Wristwatch

$25 wearable device development platform: nRF51 ARM CortexM0 w/ Bluetooth, accelerometer, 16x64 OLED, vibration motor, HR sensor, battery

Hacking a $25 nRF51 ARM Cortex Activity Tracker

A very minimal design to break out some common peripherals of the CM4. More a quick demonstration than anything else.

Minimal Raspberry Pi CM 4 Carrier

Prof. Fartsparkle

Displaying the time on 8x8 pixels.

Micro Word Clock

An almost completely 3D-printable shredder that can be used to shred 3D-prints ;-)

3D-printable shredder

The 2018 Hackaday Prize

Newest technology in old fashion syle ;-)

BOBOXIE - nixie / vfd tube style desktop clock

In this project I use adressable RGB leds to make a linear clock. The clock will be connected to Google Calendar to show my appointments.

Linear Calendar Clock

Arduino-compatible ATMega32U4 board with USB-C PD3.0 PPS Trigger

PD Micro - USB-C PD3.0 PPS Trigger

A real-life invisibility shield inspired by Harry Potter's invisibility cloak.

Invisibility Shield

Easily document cables and wiring harnesses

WireViz

Hackaday Prize 2020

A windturbine made from PET-bottles! Completely 3D-printable and open-source.

Propel-E 50 | A powerful recycled windturbine

Bram Peirs @ fWtW

The 2018 Hackaday Prize

A palm-sized Personal Air Quality Monitor that displays measured data on a bright, colorful 2.8" TFT screen.

VizAQ | Air Quality Visualizer

ACROBOTIC Industries

Want a color-angular approach to inspecting your solder joint fillet quality? This rainbow-dome is your solution for less than $20!

DIY AOI RGB Light

Parties end up in the kitchen, so why not give the kitchen lamp a party mode?

Programmable Kitchen Island Lamp

View all

Bits