0%

0%

Ananthakrishnan

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 01/27/2018.

Projects I Contribute To

The 2016 Hackaday Prize

Building an HMD with no special parts, to make work easier and safer

Arduino Glasses a HMD for Multimeter

Projects I Like & Follow

Hackaday Prize 2019

Modular Open Source Hardware Tablet that is easy to hack and can run a standard Desktop Linux Distribution (or Android)

DLT one - A Damn Linux Tablet!

Prof. Fartsparkle

The 2017 Hackaday Prize

An outside pole mounted aerial picks up 4G signals which are then filtered, amplified and re-transmitted through a second inside aerial.

Cell Phone 4G LTE Repeater / Booster / Femtocell

Tegwyn☠Twmffat

Tiny IOT Solution based on Arduino& SIM808 GPS/GPRS

IOT- SIM808 GPS Tracker Based on Arduino

Make your own Jukebox using a Raspberry Pi & cheap components. A cool decoration to entertain your guests + a smart hub for your smart home

DIY Jukebox With Raspberry Pi

A small device to turn one IR remote control's power signal into another's.

Remote Control Translator

A 20 character retro-display word clock in 5 minute increments

Five minute clock

The OnoESC is a 32-bit 30A 3S sensor-less brush-less motor controller that is Arduino Zero compatible.

OnoESC 32-bit 30A ESC

Handy little displays for the ZX80, ZX81, Acorn Atom, Jupiter Ace, etc.

Baseband video on old TV

Based on my experiences with the Multi-Material hotend for the Prusa, I'm trying to build something "better"

Multi-Material Hotend

Security alarm based on NE555 timer and logic gates, made for hobby purpose

Security alarm

Andrea De Napoli

3D printed mount for reed switch, to connect my itron gas meter to the loxone home automation system

gas meter reed switch pulse counter

andrew.crockford

Speed measurement test in KPH using Arduino Uno and National Instrument (VISA)

Arduino Speedometer Tester

Rishaldy Prisly

Signal strength? Battery? Wireless is not always the best solution for IoT. Build a 'wired' Arduino-compatible IoT platform with CAN-bus.

Uncon Talk: Building a 'wired' IoT network.

Alain Pannetrat

An LED Pendent to wear as a necklace that has an eye that follows you...

LED Pendent: Followers Eye

Stephen Tranovich

A non destructive basic garage opener

IoT Garage Opener

A Digital Timer, Stop Watch and Split Timer Project in 4D Systems' gen4-uLCD-50DCT-CLB

Digital Timer

CORE is a platform to teach Hardware in the simplest way possible.

CORE

Matheus Marotzke

The 2017 Hackaday Prize

A remedy for lower extremity Lympedema sufferers, that solves the problem of swollen blistered toes

Lymphedema Compression Garment

View all

Bits