Close
0%
0%

Tim Wilkinson

Software engineer
Hardware amateur
Incessant tinkerer

Berkeley, California
Following
Send a private message
Similar accounts worth following
614 Followers
23 Following
24 Projects
530 Likes
tim-wilkinson
Send a private message

This user joined on 08/11/2014.

14.5k
47
0
30
A common hardware, software and 3D printed module to enable fun, educational robots anyone can print and program.
Project Owner Contributor

8BitRobots Module

Tim WilkinsonTim Wilkinson

23.9k
2.5k
31
89
Underwater robots!
Project Owner Contributor

BorgCube ROV

Tim WilkinsonTim Wilkinson

24.1k
2.8k
48
72
Embedded BASIC interpreter for CC2540 and CC2541 Bluetooth LE modules
Project Owner Contributor

BlueBasic: BASIC for Bluetooth

Tim WilkinsonTim Wilkinson

4.3k
221
1
11
I wanted an enclosure for my Prusa i3 to help me print with ABS and ASA filament
Project Owner Contributor

Original Prusa i3 MK2 MM Enclosure

Tim WilkinsonTim Wilkinson

19.2k
48
9
26
A 3D printed ROV Thruster based on the Blue Robotics T100 Thruster design and a cheap A2212/13T 1000KV brushless motor
Project Owner Contributor

Cheap ROV Thruster

Tim WilkinsonTim Wilkinson

12.1k
2.7k
6
83
A general purpose robot joint using a cycloidal gearbox and an ODrive modified to support active compliance
Project Owner Contributor

3D Printed Robot Joint with Active Compliance

Tim WilkinsonTim Wilkinson

View all 24 projects

3.7k
134
48
58
This is where SuperCon attendees and speakers can discuss logistics (like transportation and where to stay) and get to know eachother
Project Owner Contributor

Hackaday SuperConference 2015

Sophi KravitzSophi Kravitz

Things I've Built

Kaffe - the original open source Java

A little bit of history: https://github.com/kaffe/kaffe

213.8k
6.3k
186
1.1k
Hobby brushless motors are incredibly cheap and powerful. However we need a way to make robots out of them. ODrive is that way.
Project Owner Contributor

ODrive - High performance motor control

Oskar WeiglOskar Weigl

144.7k
5k
63
769
A versatile autonomous environmental drone using a buoyancy engine
Project Owner Contributor

OSUG: Open-Source Underwater Glider

alexwalexw

90.8k
827
112
582
A high speed and high torque robotic actuator using low-cost brushless motors, custom controller, 3D printed parts and bearings.
Project Owner Contributor

3D Printed Robot Actuator

Paul GouldPaul Gould

35.9k
3.1k
15
329
A low-cost, high-performance bipedal walking robot
Project Owner Contributor

Blackbird Bipedal Robot

Gabrael LevineGabrael Levine

30.9k
647
41
89
Open-source myoelectric hand prosthesis
Project Owner Contributor

Dextra

Alvaro VillosladaAlvaro Villoslada

27.3k
2k
16
344
A quadrupedal walking robot
Project Owner Contributor

Dogbot

Charles GalambosCharles Galambos

23.6k
446
42
145
Strain wave or harmonic drive gears are cool. As a cheap analog for metal or flex filament splined cup, try using timing belts.
Project Owner Contributor

Strain Wave Gear with Timing Belts

Simon MerrettSimon Merrett

23k
211
30
182
An Open Source Linear Actuator
Project Owner Contributor

Linear PCB Motor

Carl BugejaCarl Bugeja

14.8k
1.6k
14
87
Need a mini linear actuator that is easy to print and implement in your robotics DIY projects? We got you
Project Owner Contributor

3D printed mini linear actuator

Giovanni LealGiovanni Leal

10.5k
107
11
92
A hardware kit to experiment with inflatable and vacuum based soft robotics.
Project Owner Contributor

Programmable Air

Amitabh ShrivastavaAmitabh Shrivastava

10.3k
50
0
29
Refactoring the SMT50 to work with OpenPnP
Project Owner Contributor

Hot Hot (Yushengtech) SMT50 OpenPnP conversion

dar.ryldar.ryl

7.7k
97
6
71
24:1 Reduction 3D Printed Dual Cycloidal Gearbox with Backlash mitigation with three split housings coupled with BLDC Motor
Project Owner Contributor

Anti-Backlash 3D Printed Cycloidal BLDC Actuator

Paul GouldPaul Gould

6.4k
573
7
43
The idea is to create an accesible prosthetic hand that is commercially available in Colombia and doesn't use the classic string system.
Project Owner Contributor

TNS 1i

Giovanni LealGiovanni Leal

4.9k
2.9k
5
39
A low-cost STM32 board with motor controllers created along with visual programming and control software for use in education.
Project Owner Contributor

Visual Robotics Platform

Joshua GraumanJoshua Grauman

3.6k
18
3
29
Portable NTSC test pattern generator
Project Owner Contributor

32 Shades of Grey

danjovicdanjovic

2.3k
31
0
12
Luna I is a small, cable operated, deep diving observation class ROV. It is designed to go to 300m and have an operation time of 3 hours.
Project Owner Contributor

Luna I ROV

MrCullDogMrCullDog

2.2k
24
0
22
A compact and simple 3D printable servo motor increases the possibility of a robot. Even a little sound can be added to the each movement.
Project Owner Contributor

3D Printed Servo Motor

Masahiro MizunoMasahiro Mizuno

763
1.7k
0
6
Spinal Cord for Robotics. The easiest way to connect the brains of your phone to the brawn of robotics.
Project Owner Contributor

BotSpine

kaikai

View all

Share this profile

Share

Bits

Send a private message to Tim Wilkinson

Become cool instantly

Create your Hackaday.io profile like Tim Wilkinson and many others

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2023 Hackaday

Report user as inappropriate

You are about to report the user "Tim Wilkinson", please tell us the reason.