Close
0%
0%

Daniel Giesbrecht

Calgary
Following
Send a private message
Similar accounts worth following
2 Followers
1 Following
0 Projects
0 Likes
daniel-giesbrecht
Send a private message

This user joined on 03/15/2016.

161.6k
787
62
502
Cartesian PNP machine using Rails/Carriages for high speed and accurate part placement. Affordable open source pick and place is on the way.
Project Owner Contributor

DIY Pick and Place

anthonywebbanthony.webb

103k
7.8k
39
338
Building an open source robot arm for makers and small businesses
Project Owner Contributor

5+ Axis Robot Arm

dan-royerDan Royer

94.6k
1,235.5k
76
2k
Follow for the 'Hacklet' and latest news about hackaday.io
Project Owner Contributor

Hackaday.io Project

lutetiumLutetium

92.5k
2k
26
454
A powerful, compliant actuator for legged robotics
Project Owner Contributor

OpenTorque Actuator

gabrael-levineGabrael Levine

35.8k
416
25
208
ProtoVoltaics Pick and Place Machine Project
Project Owner Contributor

Pick and Place Machine

protovoltaicsProtoVoltaics

31.1k
331
26
201
Advanced Pick and Place machine
Project Owner Contributor

brdMaker

mika-heikkinenMika Heikkinen

24.4k
127
18
92
Smart servo based robot arm
Project Owner Contributor

6DOF Robotic arm

dannyvandenheuveldannyvandenheuvel

23.5k
2.5k
3
132
LitePlacer is a Pick and Place machine optimized for prototype assembly. It has optical calibration with two cameras: www.liteplacer.com
Project Owner Contributor

LitePlacer - a low cost Pick and Place machine

juha-kuusamaJuha Kuusama

23k
232
71
212
A handheld game console programmable with (Micro/Circuit)Python.
Project Owner Contributor

µGame

dehipudeʃhipu

11.8k
50
0
37
Learning Verilog by creating an FPGA implementation of the Nintendo Entertainment System
Project Owner Contributor

FPGA NES

irwinzirwinz

9.9k
87
0
74
OPEN SOURCE / 3D printed robot. Arduino M0 based and created using common elements from the Makers/ 3D printers World.
Project Owner Contributor

PyBot SCARA Robotic Arm (3D printed + Python)

jjrobotscomjjrobots.com

6.6k
134
8
87
Tiny board with a BIG FPGA. SD card, 64mbit DDR RAM, ECP5 FPGA, 64mbit flash, and micro USB. Do more with up to 45k LUTs.
Project Owner Contributor

TinyFPGA E-Series

luke-valentyLuke Valenty

5.9k
89
1
23
We are trying to make cost viable feeders for OpenPnP Machines.
Project Owner Contributor

Automatic Pick and Place Feeders

protovoltaicsProtoVoltaics

3.1k
22
5
15
DIY 1000FPS Open Source Raspberry PI IMX219 MIPI CSI-2 Camera FPGA Interface To FX3 USB 3.0, Streaming 2Gbps UVC Video Stream up to 1000FPS
Project Owner Contributor

1000 FPS MIPI CSI-2 Camera Sensor FPGA Receiver

gaurav-singhGaurav Singh

2.2k
25
0
17
In this project, I will try to create 3D printed pick and place machine.
Project Owner Contributor

3D printed pick and place machine

miroslav-zuzelkaMiroslav Zuzelka

Share this profile

Share

Bits

Send a private message to Daniel Giesbrecht

Become cool instantly

Create your Hackaday.io profile like Daniel Giesbrecht and many others

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday

Report user as inappropriate

You are about to report the user "Daniel Giesbrecht", please tell us the reason.