0%

0%

marcel.ochsendorf

Maker,Hacker

Germany

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

GitHub

This user joined on 10/22/2016.

My Projects

A very simple binary clock with alarm

Simple Arduino Binary Clock

marcel.ochsendorf

A Omega2 based MailBag Notifier

Mailbag Watcher

marcel.ochsendorf

A simple and cheap light controller for your pet cage with WebControl!

Cage Light Control

marcel.ochsendorf

A advanced binary clock with gps,ntp time sync

Binary Clock with GPS/NTP

marcel.ochsendorf

Send SMS via the can bus

CAN SMS Gateway

marcel.ochsendorf

reverse engineering a cheap laser engraver protocol

Hacking K3 Laser Engraver

marcel.ochsendorf

View all 14 projects

Projects I Like & Follow

Always jealous of people who could afford big Nixie Tubes, I rolled my own alternative with WS2812Bs and laser cutting!

"Lixie", an LED alternative to the Nixie Tube

Fully 3D printed x-ray machine using a dental tube and a custom transformer.

3D Printed X-Ray Machine

Hackaday Prize 2019

Creating a free & open source global IoT network, democratizing access to space by miniaturizing aerospace systems.

FossaSat-1, Open Source Satellite

Julian Fernandez

If you have a lot of time, you can decide your position on Earth just using watches and eyes. Or RTC and LDR.

Light level geolocator

A 3D printed fully mechanical 7 segment display. It can be used without any electronic at all, by turning a gear.

Peters 7-seg all mechanical display prototype 2

Monitoring and logging traffic of all 14 2.4GHz WiFi channels! Now even better :D

New WiFi Satellite #35c3

Open-Source, Arduino-Compatible RF Signal Generator with Wi-Fi Connectivity

ERASynth

Hackaday Prize 2019

Using low cost parts to construct a cable robot with incredible capabilities.

Cable Robot

24 hour clock made with relay logic

Swifty's Relay Clock Project

SwiftyTheFox001

Turn any small DC motor into a powerful servo-motor with robust and accurate position, speed and torque control with this tiny controller.

Tiny Closed-Loop Motor Controller

for Mouser and MacroFAB Blink An LED competition

Solar-powered flashing LED heart pendant PCB coil

Use TEA5767 FM radio module in combination with ESP-8266 self hosted web interface

esp8266-radio-box

andrey.malyshenko

The 2018 Hackaday Prize

Illuminated, 3D printed guitar.

Sound-Reactive LED Guitar

A little box you can use to develop accelerometer products

MPU6050 Dev Platform

The TSOC_Teensy3x is a thingSoC adapter for the excellent Teensy3.2 board from PJRC.

thingSoC Teensy3x

The 2017 Hackaday Prize

Assistive devices can be prohibitively expensive. What if we can hack together assistive devices using products found at Walmart?

Hacking Walmart: Assistive Devices

Andrew Maxwell-Parish

Energy can travel around the world but still can't go through a simple LED

Useless Power Indicator

A project completed for MIT's ProjX program in 2016 to develop a low-cost indoor 3D localization system using time-of-flight of sound waves.

Indoor 3D Localization with Sound

View all

Bits

Radu Motisan wrote 01/10/2019 at 09:38

thanks for following # Global radiation monitoring network . Any plans to build one unit?

Are you sure? yes | no

marcel.ochsendorf wrote 01/10/2019 at 18:47

yes, im planning to build one

Are you sure? yes | no

David H Haffner Sr wrote 06/08/2017 at 22:56

Thank you for the follow :)

Are you sure? yes | no

David H Haffner Sr wrote 06/06/2017 at 12:11

Thank you for the like :)

Are you sure? yes | no