Close
0%
0%

Nicholas Hafnee

Following
Similar accounts worth following
1 Followers
45 Following
0 Projects
0 Likes
nicholas-hafnee

This user joined on 10/12/2017.

Things I've Built

Led light box

Put together 3 led is an altoids tin with hot glue. Ensuring it was wired in sires parallel two a 9 volt battery with a switch and appropriate resistor.

140.7k
5.2k
164
861
Mechaduino is an affordable, open-source, industrial servo motor. Position, torque, velocity, and custom modes. Arduino compatible.
Project Owner Contributor

Mechaduino

jcchurchjcchurch

14.2k
6.4k
3
117
open hardware 2 GHz to 13 GHz two-port vector network analyzer
Project Owner Contributor

Vector Network Analyzer

jon-kleinJon Klein

9k
6.7k
1
41
Over the last 10 years or so my personal home automation controller has grown and grown.
Project Owner Contributor

Home Automation Console.

todd-andersonTodd Anderson

5.8k
873
1
17
Just a PiZero Pocket Computer case, with ability to plug any available Monitor (Component Video, HDMI, LCD) and a keyboard via USB HUB
Project Owner Contributor

Pi ZERO Arduino programming station

sergeySergey

5.4k
1.3k
2
28
Identify Car license plates with Raspberry Pi Python + PHP + Telegram
Project Owner Contributor

Smart Gates

evgheniiEvghenii

4.3k
4.4k
32
50
A unique approach to 3D printing that injects curing resin into a gel. The rig is designed to be added to most hackable 3D printers.
Project Owner Contributor

Suspension 3D Printing

michaelMichael

4.1k
3.9k
2
12
A smartwatch project using STM32 microcontroller with ST7735 1.44' Lcd display screen, Bluetooth 4.0 and some sensors
Project Owner Contributor

MENTOL SmartWatch

furkan-etinFurkan Çetin

4k
3.5k
0
12
Turned an antique intercom into an Amazon Echo
Project Owner Contributor

50s Intercom Raspberry Pi Echo

nickrbrewernick.r.brewer

3.9k
3.9k
0
22
A small and flexible system for building a home automation system.
Project Owner Contributor

Small Home Automation System

siggiSiggi

1.7k
971
0
9
A 3D Raycasting engine to run on an Arduino with a 32x16 LED matrix panel instead of a screen.
Project Owner Contributor

Arduino LED Raycaster

dylan-turnerDylan Turner

1.3k
517
0
13
Making an mobile microscope using smartphone, laser light lens, evive and some 3 D printed parts.
Project Owner Contributor

DIY Mobile Microscope

evive-toolkitevive toolkit

1.2k
1.2k
0
3
A Roomba based research for artistic expression
Project Owner Contributor

C2-1 "NOMAD"

aaron-millerAaron Miller

845
1.3k
0
5
Internet controlled dog treat dispenser
Project Owner Contributor

Bad Wolf

nancy-yi-liangNancy Yi Liang

554
450
0
5
Low cost manual injection moulding machine for supporting makers and bridging the gap between 3d printing and mass manufacturing.
Project Owner Contributor

Low Cost Injection Moulding Machine

james-cannanJames Cannan

472
1.1k
0
3
Sending electronic devices in the air for cheap.
Project Owner Contributor

Low altitude flying electronics

miawtthiasmiawtthias

452
311
2
5
a small effort to introduce kids to LEDs, Batteries, Magnets and making LIGHT - JUGNU is Urdu for Firefly
Project Owner Contributor

Jugnu - LED Throwies

zaidpirwaniZaidPirwani

387
313
0
4
An experimental approach to digital communication through vibration
Project Owner Contributor

VITO

yuri-klebanovYuri Klebanov

237
237
3
6
A 3D printable plate that holds a Beaglebone black compatible board and a breadboard together side by side.
Project Owner Contributor

Beaglebone Black and Breadboard Plate

avrAVR

View all

Share this profile

Share

Bits

Send a private message to Nicholas Hafnee

Become cool instantly

Create your Hackaday.io profile like Nicholas Hafnee and many others

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday

Report user as inappropriate

You are about to report the user "Nicholas Hafnee", please tell us the reason.