0%

0%

jamesmartinjr

I have a 3D-Printer and am looking for cool projects, not much experience but that's why I'm here

Cali

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 02/25/2022.

My Projects

A $20 (or less well see how it goes) rubber ducky, because the ones on Hak5 are so dang expensive and on backorder

Budget Quacker

Projects I Contribute To

Mechs are not viable, nor cheap, so I will try to design and build one alone anyway.

DIY Mech/Exoskeleton suit.

Projects I Like & Follow

DIY Skirt with 120 Neopixel LEDs and motion detection

Neopixel LED Skirt

A low-cost multi-mission modular stealth UAV system

Valor Tactical Stealth sUAS

canine-defense-technologi Canine Defense Technologi

Mechs are not viable, nor cheap, so I will try to design and build one alone anyway.

DIY Mech/Exoskeleton suit.

Supplyframe DesignLab: 2022 Hackada…

EBM - 3D Metal & Ceramic Printer - Electron Beam Melting

3D Metal & Ceramic Printer

agustin-cruz Agustin Cruz

Supplyframe DesignLab: 2022 Hackada…

Combine the speed of a Delta printer with the automation of a conveyor belt

Delta belt 3D-printer for automated production

brian-brocken Brian Brocken

If you want to enter FPV world in a cheap way, read these pages !

A poor man's FPV journey

jp-gleyzes JP Gleyzes

A simple ROV i can use to dive to the deepest depths of my bathtub and my neighbor's swimming pool

Turbo Super Submarine

Combine an ultrasonic ranging sensor with some addressable LEDs to help position your car in the garage with accuracy

ESP32-based Precision Parking Assist

Learning to use a Raspberry Pi 400 laptop as an everyday computer and sharing the results.

Raspberry Pi 400 Daily Driver

A savage, retro-cyberpunk inspired Cyberdeck with a focus on human interface. Finished for the Hackaday Cyberdeck challenge 2022.

Voidnet Viator Cyberdeck

leandra-christine Leandra Christine

Cheap Piezoeletric crystals could be used both as movement sensors and vibrational haptic simulators.

DIY Full-body VR Rigid Haptic Suit

A DIY dive computer based on micropython

Micro Dive

michael Michael

In this project, I upgraded my 3D printer to be able to capture time-lapses of the prints without any additional electronics.

3D Print Time lapses Without Octoprint

In this project we built a 300w 15 cells 18650 Li-Ion Battery 3D Printed power Bank.

Best 3D Printed 18650 Battery Power Bank under $80

Interactive directional light dimming glasses.

GoGlles

szymon-bartosik Szymon Bartosik

Large Humanoid Robot 150cm With lightweight plastic design and originally planned for walking

Large Humanoid Robot

Some code with Web Serial to enable full (manual) control of I/O pins on an Arduino via a webpage.

Arduino PLC

Are you stuck in your penthouse with an ankle monitor, unable to attend family functions and meetings with your lawyer?

FPV drone for human interaction under house-arrest

View all

Bits