0%

0%

K+

Our role at K+ 3D print is to provide the best and most affordable 3d printers and printed parts. Visit us anytime for any 3D print on demand services.

Washington DC

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

Twitter

This user joined on 01/16/2022.

My Projects

In this project, the objective was to build a FPV flying wing with over 700mm wingspan that could be printed under 24 hours.

3D Printed Flying wing FPV Drone

3D Print in one piece, Less than 10 hours!

2S 18650 Mini FPV Drone

In this project we built a 300w 15 cells 18650 Li-Ion Battery 3D Printed power Bank.

Best 3D Printed 18650 Battery Power Bank under $80

Projects I Like & Follow

The 2015 Hackaday Prize

Developing a small fuelless microwave thruster

EMDrive/satellite

paul-kocyla Paul Kocyla

Follow for the 'Hacklet' and latest news about hackaday.io

Hackaday.io Project

The 2017 Hackaday Prize

Miniature VT100 with all the bells and whistles

diy-VT100 - A Miniature hardware terminal

kuldeep-singh-dhaka Kuldeep Singh Dhaka

Hackaday Prize 2019

An Off-the-grid messaging system.

Skrypt

Official Hackaday Prize Entry

This project is a clock with radio receivers which can receive the exact time from the GPS satellites or from the DCF77 transmitter.

"Connect" to an atomic clock in space! GPS, DCF77

The 2017 Hackaday Prize

Micro Smart LiDAR Sensor

MappyDot

blair-wyatt Blair Wyatt

The 2017 Hackaday Prize

Speeding up Search & Rescue by locating the position of emergency radio beacons using an autonomous drone.

Bloodhound: Autonomous Radiolocation Drone

phil-handley Phil Handley

The 2018 Hackaday Prize

The development of a dedicated hardware MIDI controller for the Turnado audio FX software plugin.

Turnado Hardware MIDI Controller

liam-lacey Liam Lacey

The 2016 Hackaday Prize

A DIY 3D printer (big volume, inexpensive, lightweight and portable).

RigTig's Big 3D Printer

Voice controlled home automation and personal cloud using a Raspberry Pi

RaspBox - Home Automation & Cloud

The 2015 Hackaday Prize

Development of a robust low cost 3D printed hand prosthesis using off-the-shelf components.

biohand - Low cost 3D printed hand prosthesis

martin-vincent-bloedorn Martin Vincent Bloedorn

The 2018 Hackaday Prize

A haptic glove that vibrates when its touches a virtual object. It also tracks physical finger positions and hand orientation.

DIY Haptic Glove for VR

dinithi-silva Dinithi Silva

The 2016 Hackaday Prize

tracking CubeSats faster, anywhere and anytime for everybody!

The Distributed Ground Station Network

Extract best practices from existing garage door projects. Build version that suites my needs; eventually integrate into other HA efforts.

Home Automation - Garage Door Opener

The 2016 Hackaday Prize

An overhaul of the iconic Power Glove to allow it to control robots, drones or anything your heart desires. It's so... good.

Power Glove Universal HID

nolan-moore Nolan Moore

Hackaday Prize 2020

Mission "Wifi" Impossible > Bring Long Range 5G and 2.4 G WiFi Backed By A 1 Gigabit Fiber To The East Brainerd EF-3 Tornado Disaster area.

Open Sky Anchor WiFi Drone Brings The GIG

josh-starnes Josh Starnes

Hackaday Prize 2019

Small magic pcb for moving miniature cars, trains or satellites :-)

Ant highway - linear motor for micro cars

Step-by-step instruction to run Wine on Raspberry Pi (or other ARM) using ExaGear Desktop

Run Wine on Raspberry Pi

View all

Bits