0%

0%

Conor Nolan

A mechanical engineering student with strong interests in electrical design and programming.

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 10/16/2020.

Projects I Like & Follow

The 2018 Hackaday Prize

A smaller and cheaper open source brushless motor

PCB Motor

carl-bugeja Carl Bugeja

The 2017 Hackaday Prize

An affordable modular platform for open robotics development for hackers. Provides a jump start to build your own robot.

MORPH : Modular Open Robotics Platform for Hackers

roald-lemmens Roald Lemmens

The 2017 Hackaday Prize

Speeding up Search & Rescue by locating the position of emergency radio beacons using an autonomous drone.

Bloodhound: Autonomous Radiolocation Drone

phil-handley Phil Handley

Hackaday Prize 2019

Creating a free & open source global IoT network, democratizing access to space by miniaturizing aerospace systems.

FossaSat-1, Open Source Satellite

julian-fernandez Julian Fernandez

An Arduino controlled infinity mirror mask. You can even see while wearing it!

Infinity Mirror Scuba Mask

curt-white Curt White

The 2018 Hackaday Prize

Robotic platform for water quality sensors inspired by clams.

Open Source Underwater Distributed Sensor Network

michael-barton-sweeney Michael Barton-Sweeney

Hackaday Prize 2019

Convert FPV racing drone into an interceptor using Raspberry Pi

Open Source Air Defense

ray-patel Ray Patel

Replacement PCB for TS100, adds USB-C PD to every hackers favourite tool!

Otter-Iron - TS100 USB-PD hardware mod

jana-marie Jana Marie

How to generate frequencies below 10Hz using a PC, an amplifier, and a handful of components.

Extreme Low Frequency Signal Generator

joseph-eoff Joseph Eoff

How you can get multi-connect and remote access to USB Dongle

Donglify - Share USB Key Software

Create a home automation gateway, you can access from anywhere, using a Raspberry PI, Sonoff switches with Tasmota and FlashLex.

Internet Accessible Home Automation with Sonoff

clay-graham Clay Graham

A project to design, build and fly a 3D printed high power model rocket air-frame, capable of flying with up to a K Class motor.

Fully 3D Printed Level 1-2 NAR Cert Rocket

Mitchell O'Connor

Hackaday Prize 2020

You can easily control light, fan, and other home appliances with the voice command.

Alexa Home Automation System Using NodeMCU & Relay

A really simple CAN network protocol for up to 30 nodes.

CAN Simple (protocol)

For "Repairs You Can Print Contest", and for the sake of documenting the repairs and improvements, done by 3D printing.

3D Printed Repairs

christian-lerche Christian Lerche

This project is about building your own stopwatch using the Arduino board and a few other components.

Arduino Stopwatch

hiotron hIOTron

Something to make your life easier on the bed, when you have to switch off your tv and any other light in the house :-)

IR and NRF remote based on arduino

Orange Pi 2g IoT based GSM PBX using Asterisk

Orange Pi 2g IoT based GSM PBX using Asterisk

asim-rasheed Asim Rasheed

View all

Bits