0%

0%

ebgrisi

I like electronics

Following Follow me

Similar accounts worth following

This user joined on 06/11/2021.

Projects I Like & Follow

A near-Arduino Nano form factor and Arduino compatible board based around a "better" and cheaper AVR MCU (currently an ATtiny1616)

The Launchpad - A $2 Arduino Nano alternative

clyde-d-corpuz Clyde D. Corpuz

K3lso is a quadruped robot similar to MIT mini cheetah and MIT Cheetah 3.

K3lso Quadruped

robin-frjd Robin Fröjd

Wireless packet radio interface for HF/VHF/UHF transceivers, using ESP32 as KISS TNC or audio relay for use with soft modems

ESP32 TNC and Audio Relay for HF/VHF Packet Radio

ryan-kinnett Ryan Kinnett

Monitor the emission of toxic chemicals from 3D Printing

Smart 3D Printer Emission Monitor

gary-peng Gary Peng

2021 Hackaday Prize

Cheap, Open-source, safe, and compliant 6 - Axis 3d printed robotic arm based on Quasi direct drive BLDC drives.

CM6 - Compliant 3D printed robotic arm

petar-crnjak Petar Crnjak

Tomographic scanner using my X-Ray machine, a simple motor to rotate the object and a reconstruction software

X-Ray CT Scanner

francisco-piernas Francisco Piernas

An Arduino controlled infinity mirror mask. You can even see while wearing it!

Infinity Mirror Scuba Mask

curt-white Curt White

Final project for MIT's 6.013 Applications of Electromagnetics

Doppler Radar

reed-foster Reed Foster

Raspberry Pi 3B based robot, distance sensors, and ROS.

Wall Following and Obstacle Avoidance

sinclair-gurny Sinclair Gurny

My 4 axis motion control rig

Motion Control Rig - 0.1.0

Experimenting with 3D printed tools.

3D Printed Opensource Tools

Arduino Sketch for ESP32, using RC-Switch(c) library and the ESP32 RMT peripheral to emulate RF remote controls (433/315Mhz)

ESP32 RMT peripheral for radio remote control

Hackaday Prize 2020

Happy Prototyping powered by Android

LabDroid

In a few steps we build a basic ultra low power WiFi home automation system by using Raspberry Pi, IOT Cricket module(s) and MQTT protocol

Ultra low power WiFi home automation system

Tracking plant health through weight

Weighing Plants

kevin-arne Kevin Arne

Automatically switch the direction of RS485 drivers, Useful for controllers without dedicated hardware, like BeagleBone and Raspberry PI.

Automatic Direction Control for RS-485 Interfaces

Hackaday Prize 2020

Conservation X Labs Open Challenge, Water Bound Alerts for invasive species monitoring by IR camera machine vision on a buoy

Anableps Buoy, Invasive Species Alerts

josh-starnes Josh Starnes

A multi-thread enabled N-Queens benchmark for hardware running Python.

The N-queens Problem in Python

mauro-riva Mauro Riva

View all

Bits