0%

0%

gpappasv

Electrical and computer engineering student interested on DIY projects

Greece

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

GitHub

This user joined on 08/01/2021.

Projects I Like & Follow

The 2018 Hackaday Prize

diy direct-drive extruder 3D printer running Klipper firmware

protoDEV 3d printer

michal-wojciechowski Michal Wojciechowski

The 2016 Hackaday Prize

Over the last 10 years or so my personal home automation controller has grown and grown.

Home Automation Console.

Experimental case testing 3D printed "waterproofing" and water resistance.

Water Resistant 3D Printed Enclosures

The 2018 Hackaday Prize

Using an esp8266, arduino nano, a salvaged usb power supply, and a couple relays you can automate anything

Home automation on the cheap

I made a custom USB HUB and now free to everyone to download

Opensource USB HUB

Tiny IOT Solution based on Arduino& SIM808 GPS/GPRS

IOT- SIM808 GPS Tracker Based on Arduino

A Fully 3D Printed Arduino Robot Arm for STEM Education

LittleArm 2C: 3D Printed Robot Arm

Open-source design for a 3d printer that can print metal at a low cost.

FDM 3D Metal Printer

Use a small camera equiped vehicle to explore tight but vast spaces. Remotely control by wifi.

Remote wifi video car

Turned an antique intercom into an Amazon Echo

50s Intercom Raspberry Pi Echo

nickrbrewer nick.r.brewer

The 2016 Hackaday Prize

Qubie is a small wireless device that measures waiting time at a polling place for the benefit of both election jurisdictions and citizens.

Qubie

Create a home automation gateway, you can access from anywhere, using a Raspberry PI, Sonoff switches with Tasmota and FlashLex.

Internet Accessible Home Automation with Sonoff

clay-graham Clay Graham

Hackaday Prize 2020

We show how to build IOT WiFi Motion Sensor powered on a battery with email notification over IFTTT.

WiFi Motion Sensor (3D print) - DIY

How to make an IoT-based Smart Home with Blynk 2.0 using NodeMCU ESP8266 to control 4 home appliances with real-time feedback.

Smart Home Using NodeMCU ESP8266 & Blynk IoT app

A kitchen knife that you can control over the internet.

Remote Chef

tim-van-iersel Tim van Iersel

IoT-based Home Automation with Arduino IoT Cloud & Alexa using ESP32 to control 4 home appliances with voice commands. (Circuit + Code)

Arduino IoT Cloud ESP32 Alexa Control Smart Home

Using an 80s handheld for home automation

PSION II Remote Control

matt-callow Matt Callow

Using an IR remote control, display the presence of hazardous gases w/ MQ series sensors and get notified when they reach dangerous levels.

Joker Remote Hazardous Gas Station and Monitor

kutluhanaktar kutluhan_aktar

View all

Bits