0%

0%

Michal Wojciechowski

prototype developer?

Poland

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

GitHub

This user joined on 03/13/2018.

My Projects

The 2018 Hackaday Prize

diy direct-drive extruder 3D printer running Klipper firmware

protoDEV 3d printer

michal-wojciechowski Michal Wojciechowski

simple and small 3d printer with most of parts printed at home

protoBOT 3d printer

michal-wojciechowski Michal Wojciechowski

Projects I Like & Follow

A controller for LCD/OLED screens with MIPI DSI interface. Arduino shield format, HDMI-to-DSI adapter & built-in framebuffer.

MIPI DSI Display Shield/HDMI Adapter

Hackaday Prize 2020

Cheap 3D printed 4 legged robot, that almost looks like boston dynamics spot but moves like a newborn.

DIY hobby servos quadruped robot

miguel-ayuso-parrilla Miguel Ayuso Parrilla

Hackaday Prize 2019

High Power, High Performance 400V 300A 100+kW Motor Controller fully compatible with VESC®

Axiom: 100+kW Motor Controller

The 2018 Hackaday Prize

The Automatic Infinite 3D Printer (i3D) gives anyone the power of a factory.

Automatic Infinite 3D Printer

swaleh-owais Swaleh Owais

The 2016 Hackaday Prize

Mechaduino is an affordable, open-source, industrial servo motor. Position, torque, velocity, and custom modes. Arduino compatible.

Mechaduino

Goal: To assemble a working CO2 Laser from a minimum investment using only tools one can find at your average home improvement store.

Low Cost CO2 Laser Build

The 2018 Hackaday Prize

A high speed and high torque robotic actuator using low-cost brushless motors, custom controller, 3D printed parts and bearings.

3D Printed Robot Actuator

paul-gould Paul Gould

Offline password keeper project created by and for the Hackaday community

Mooltipass Offline Password Keeper

mathieu-stephan Mathieu Stephan

Hackaday Prize 2019

Fun-on-a-Keychain is back, packing all your games and multiple emulators in a cute and extremely tiny handheld console.

FunKey project - All your games on your keychain !

cinvent c.Invent

Reverse engineer, reprogram or otherwise use the UV/OV/balancing circuits built into each of the 16 modules in a Tesla Model S battery pack.

Model S BMS hacking

The 2018 Hackaday Prize

AMS's new AS7265X 3-chip set promises a compact, 18-channel, 20 nm FWMH spectrometer for less than $25

Compact, $25 spectrometer

kris-winer Kris Winer

Supplyframe DesignLab: 2023 Hackada…

An open hardware reading device rooted in Adafruit's Feather ecosystem

The Open Book Feather

joey-castillo joey castillo

Official Hackaday Prize Entry

An affordable Arduino controlled multipurpose laser exposing device. Use it for SLA Printers, PCB Exposing, Laser Harp etc.

OpenExposer

mario-lukas Mario Lukas

Collecting snippets that can quickly be copied to assemble a program for different sensors etc. Mostly about ESP8266/32 with Arduino IDE.

ESP cookbook

turo-heikkinen Turo Heikkinen

I came across a RDA5807FP chip in an old alarm clock and made it into a fully functioning radio with RDS functionality

Arduino Radio with RDS

maarten-janssen Maarten Janssen

The 2017 Hackaday Prize

RepRap HELIOS is a highly printable SCARA 3D printer. It has an outrageous print area and can print on almost any flat surface.

RepRap HELIOS

nicholas-seward Nicholas Seward

Official Hackaday Prize Entry

A 3D printer with 4 extruders that can move independently and simultaneously

Theta Printer

tyler-anderson Tyler Anderson

Hackaday Prize 2019

A dynamics oriented quadruped for research and education.

SmallKat: An adorable dynamics oriented robot cat

kevin-harrington Kevin Harrington

View all

Bits