0%

0%

Jason Clemons

Computer engineer with an interest in robotics and physically interactive gaming projects. Build embedded systems is just fun.

Earth

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

github

This user joined on 12/04/2015.

Things I've Built

PAX Messenger Bag

The Pax bag was a joint project with my spouse. We built a bag with an LCD display that cycled through all the comics from <a href="http://www.penny-arcade.com"; target="_blank">www.penny-arcade.com</a>. The PAX logo was outfitted with capacitive touch sensors. The konami code was supported.

Projects I Like & Follow

Home automation using the Loxone series of home automation products along with hacks to extend functionality and reduce cost

Commercial home automation

ian-norton Ian Norton

A stabilization system for drones using a pyboard, a MPU6050 and a RC receiver

Micropython Flight Controller

The 2015 Hackaday Prize

A home automation box that allows you to connect any device and be controlled by any device and optimizes electricity consumption

Beaglebone Black Home Automation

ansaf-ahmad Ansaf Ahmad

Arduino compatible, breadboard friendly DIP32 package with ATMega1284RFR2, OLED display, SD card, SRAM and ZigBee on board.

DIPDuino=(Arduino+ZigBee+OLED+SDCard+SRAM)*DIP32

Alex Gornostayev

In this project i will try to take the little piece of magic called the raspberri pi and turn it into a computer the size of a nintendo ds.

Raspberry pi pocket PC

The 2015 Hackaday Prize

Preterm infants come in lots of different sizes. Nasal CPAP cannula come in few sizes. Read on to see if we can 3D print a solution.

Individualised nasal CPAP cannula for preterm kids

ben-hartmann Ben Hartmann

Cactus Micro is our integrated developement board, we have mixed Arduino with WI-FI ESP8266 module into a single board.

Cactus Micro R2 Arduino compatible plus esp8266

Raspberry Pi + Temp Sensor + RockBLOCK = :-)

Remote Controlled Weather Station

IoT pill dispenser with alerts to ensure compliance

Medcheck

bsutton bsutton

The 2015 Hackaday Prize

A voodoo style control of humanoids or others, that incorporates video stream and haptics. Apparatus for Remote Control of Humanoid Robots.

ARCHR

This is a lowcost rf module designed to link sensors etc to a home automation setup..

Yet another Home Automation Wireless Doodad!

dimmable LEDring for the illumination of camera photos

"Project Q" - LEDring

Connecting Raspberry Pi to 230V Sainsmart relais

PiSaint home automation board

richard-deininger Richard Deininger

Using a ATtiny85 to control a RGB LED inside a transparent RPI case.

Raspberry Pi internal ATtiny85 + RGB LED.

Robot designed as a starting point for 1 lb combat robots

Simple Small Robot

andrew-schreiber Andrew Schreiber

steampunk, casemod, homeautomation, arduino, 433mhz, python

Steampunk HomeAutomation-Device

Recorder , audio player and more...

Sound Recorder

mipstudio M.i.P.studio

A cheap 3d-printed rail and shoulder rig for DSLR cameras

DSLR rail rig

martin-petersson Martin Petersson

View all

Bits