0%

0%

Oliver

Mechanical engineer and musician

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

This user joined on 06/08/2023.

My Projects

A low cost, open-source audio interface

OpenMic

Projects I Like & Follow

My attempt to build a desktop arcade machine by 3D printing the cabinet and using Raspberry Pi 3 running RetroPie.

Desktop Arcade Machine : 3D Printed + RetroPie

christopher-tan Christopher Tan

How to share a USB key and make a backup of a Dongle?

Share a USB dongle - Software Solution

A 3D printed stereotax

3D printed rodent stereotaxic device

lex-kravitz Lex Kravitz

The 2017 Hackaday Prize

No more restrictions from high level software! Access the lowest level of radio transmission with this programmable USB stick.

Open narrowband RF transceiver

Two hearts are better than one, so why not have five. Quadcore RPI CM4 and a MCU on a single board for true all-in-one 3D printer control.

Sigmoid S7P 3D Printer Control Board

exciting project using arduino and python

RADAR

Music server based on orange pi zero v.1.5 board, PCM5102 I2S DAC, and pulse server and mopidy running in docker on the software side.

OrangePi Zero pulse music server using I2S DAC

andriymalyshenko andriy.malyshenko

Dual stepper motors plus two servo-driven percussion instruments, in a tidy project box.

Stepper Music Box

Jeremy Weatherford

Make a filament spool holder real quick.

30 Second 3D Printer Filament Spool Holder

andy-lee Andy Lee

21 Band Audio Spectrum Analyzer

samm928 samm928

An electro-mechanical Valentine Day automaton with an 18 layer heart.

A 3D Printed Valentine For My Wife, With A Twist.

greg-zumwalt Greg Zumwalt

transmitting 24-bit lossless SPDIF audio wirelessly for $12

$12 wireless lossless digital audio

Art piece that creates kaleidoscopic colored shadows. Arrays of high-powered LEDs in a circle, pointing at the center.

Colordance Circle

adam-demuri Adam Demuri

Air quality sensor systems for urban bodies of water, so that the population can avoid potentially dangerous exposure

2022 HDP 4 - Climate Resilient Communities

supplyframe-designlab Supplyframe DesignLab

A few months ago I discovered "How to Build a Digital Computer That Works" and got excited about the project.

PaperClip Computer

marcelo Marcelo

In this project we will see a mono audio amplifier of very good audio quality with the TDA2003A IC.

AUDIO AMPLIFIER TDA2003A

A RP2040-based Board with 32-bit Audio Output and 8x 12-bit 1MSPS ADC for creating standalone synthesizers and noise boxes.

PicoADK - Audio Development Kit

Application that producers 3D audio from 2D mono audio samples and a graphical user interface.

3D Audio Producer

pablo-antonio-camacho-jr Pablo Antonio Camacho Jr.

View all

Bits