Close

Your browser (Internet Explorer) is out of date.

Update your browser for more security, comfort and the best experience on this site.

Update Internet Explorer'

Projects Lee Cook likes and follows

99.4k
1,386.9k
2.2k
Follow for the 'Hacklet' and latest news about hackaday.io
Project Owner Contributor

Hackaday.io Project

lutetiumLutetium

165.4k
14.5k
356
Developing a small fuelless microwave thruster
Project Owner Contributor

EMDrive/satellite

paul-kocylaPaul Kocyla

11.1k
11.1k
53
QubeCast Max is a high powered radio module for PocketQube Satellites, HAB payloads, or anything that needs a small radio transciever.
Project Owner Contributor

QubeCast Max

ozqubeOzQube

15.3k
8.5k
87
This project aims to build a tilt sensor that is cheap, very accurate and has a wide measuring range (up to 360 degrees).
Project Owner Contributor

A new high accuracy tilt sensor

aron-molnarAron Molnar

220.7k
7.3k
1.1k
Hobby brushless motors are incredibly cheap and powerful. However we need a way to make robots out of them. ODrive is that way.
Project Owner Contributor

ODrive - High performance motor control

oskar-weiglOskar Weigl

21.3k
6.9k
139
Takes 3D surface scans at close range. It is simple to construct as it uses off the shelf hardware and software.
Project Owner Contributor

3D scanner

jolarJolar

33.2k
6.7k
108
3D Printed components and other hardware to make a PCB routing machine, which inherently can do other things.
Project Owner Contributor

3D Printed PCB mill

dteelDTeel

28.3k
5.7k
203
A solar energy system up to 500W in power for use with lithium batteries.
Project Owner Contributor

Solar Energy Generator

nathaniel-verleeNathaniel VerLee

13.6k
5.4k
132
An open-source Arduino compatible remote controller (transmitter) with many customization options for robots and drones.
Project Owner Contributor

Alpha V1: Open-Source Remote Controller

alireza-safdarialireza safdari

4.5k
4.8k
53
A unique approach to 3D printing that injects curing resin into a gel. The rig is designed to be added to most hackable 3D printers.
Project Owner Contributor

Suspension 3D Printing

michaelMichael

6.2k
4.8k
40
A mixed reality shooting gallery using virtual reality tracking hardware.
Project Owner Contributor

Mixed Reality Room Scale Shooting Gallery

richard-hogbenRichard Hogben

8.1k
4.2k
44
An open source HW & SW motor controller for fine-grained control of brushless DC motors for robotics.
Project Owner Contributor

SmoothControl

matthew-mooreMatthew Moore

100k
3.4k
356
An open-source ultrasound imaging dev kit side project
Project Owner Contributor

Murgen: open source ultrasound imaging

kelu124kelu124

16.6k
3.4k
50
... with video pass-through ...
Project Owner Contributor

DIY Augmented Reality Device

arcadia-labsArcadia Labs

23.7k
2.7k
133
LitePlacer is a Pick and Place machine optimized for prototype assembly. It has optical calibration with two cameras: www.liteplacer.com
Project Owner Contributor

LitePlacer - a low cost Pick and Place machine

juha-kuusamaJuha Kuusama

17.6k
2.4k
44
Performing high precision indoor positioning using Vive Lighthouses, Arduino Due, and TS3633-CM1
Project Owner Contributor

Precision Indoor Positioning

mike-turveyMike Turvey

21k
2.3k
138
ice40 FPGA based custom board to control eink display
Project Owner Contributor

FPGA eink controller

julienJulien

8.5k
2.1k
50
Mainboard that retro fits a Nokia 3210 mobile phone.
Project Owner Contributor

Nokia 3210 Retro Fit Board

platinenmacherPlatinenmacher

2.6k
2.1k
15
If you are hobbyist and existing free and open source CAM programs do not satisfy you, take a look at BCAM.
Project Owner Contributor

BCAM - 2D computer-aided manufacturing

snegovickSnegovick

4.1k
1.8k
16
04K - 50K LUT. Kicad. Open source. Pin header 1.27mm. 92 IOs. Breadboard-compatible. Lots of optional GND.
Project Owner Contributor

Altera MAX10 Breakout Board

lars-rLars R.

8.1k
1.8k
30
Automated barbecue and smoker on a budget
Project Owner Contributor

Smokey Mc Smokerson

hackershubHackersHub

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2025 Hackaday