524 Results for "강남권룸싸롱【θ1θ↔4⑥48↔0⑨30】xavi서울룸싸롱±선릉추천업소￡역삼풀싸롱ksubi강남룸접대paul서초풀싸롱σ강남추천업소θ선릉풀싸롱δ"

Neural Network - Training
Instructions from Accuracy-Sensing Smart Sports Rebounder with ESP32
The data you use to train a neural network should encompass all possible cases you may expect to see during operation. In this project, that means soccer ball bounces on the rebounder at many different locations, and of varying velocity at different...

Not so much build, but use -- instructions
Instructions from Big Fucking "Covid" Badge
First things first. The badge has three modes: normal "Conway's game-of-life" mode, Nyan Cat mode, and menu mode.In the normal game mode or Nyan Cat mode, the up and down buttons will adjust the brightness and the left and right buttons will adjust the...

Motor Initialization
Instructions from BrailleBot
To initialize the motors position, follow these steps: Ensure that you have the Arduino IDE installed with the latest ESP32 board manager.If you haven't installed the ESP32 board manager, you can follow the instructions in this link: Installing...

DIY Jukebox With Raspberry Pi
Instructions from DIY Jukebox With Raspberry Pi
Step 1: REQUIRED COMPONENTSRaspberry Pi 2 or 3 // ~$10~$3516 GB SD card // ~$8Big breadboard // ~$4GPIO buttons + jumper and hook-up wires // <$2speakers ~$0usb stick ~$0philips hue bulb ~$10-$20you can get everything for around $50.< body></$2speakers>...

Wii Stream: Turn your Wii into a Sonos
Instructions from Wii Stream: Turn your Wii into a Sonos
Introduction This guide details the steps for installing WiiStream on your Nintendo Wii. Follow each step closely for a successful setup. Prerequisites A Nintendo Wii matching one of the model numbers hereAn SD cardA PC with internet access (here...

Electric Typewriter to Teleprinter
Instructions from Electric Typewriter to Teleprinter
If we want this to be emulated by a microcontroller, we need to feed it the "scan" as an input and have it output to "in". Also we need to know which combination "presses" what key. This can be done going through all permutations of possible connections...

Using the app
Instructions from uECG - small open source wireless ECG sensor
The app is only for Android currently. Not all Android phones may be supported: please feel free to complain loudly in the comments on Hackaday and we’ll try to fix it! :)This is steps for Android 7+:1. Download the free uECG monitor app from Google...

Step 12: Setting up the neural network model on Beetle ESP32-C3
Instructions from Multi-Model AI-Based Mechanical Anomaly Detector
After building, training, and deploying my neural network model as an Arduino library on Edge Impulse, I needed to upload the generated Arduino library on Beetle ESP32-C3 to run the model directly so as to detect sound-based mechanical anomalies with...

BOOT MODE JUMPERS SETTINGS for eSnyne/S9:
Instructions from eSnyne - a Powerful FPGA/SoC Developpement Board
|Boot Mode |JP1|JP2|JP3|JP4| | JTAG | 0 | 0 | 0 | 0 | | SD | 0 | 1 | 0 | 1 | | QSPI | 0 | 0 | 0 | 1 | | NAND | 0 | 1 | 0 | 0 | | NOR | 0 | 0 | 1 | 0 | /-------------------------------------------------------------------------------------------------------------------------------------------------------------------/...

Final Code
Instructions from Synth Design System - Addressable MUX Circuit
I split the code up into three by putting the MUX code and the Teensy settings in library files. Main Program Synth_USB_Modular_MUX.ino calls the libraries MUXController.h TeensyAudioDesignTool.h Main Program: Synth_USB_Modular_MUX.ino...

Affordable Reflectance Transformation Imaging Dome
Instructions from Affordable Reflectance Transformation Imaging Dome
In creating an RTI dataset from the photos you generate with the RTI-Mage, software fits a separate curve of pixel luminance as a function of lighting angle for every pixel in the image, using the pixel luminance data from the photos you’ve taken. It...

Connect Peripherals and Connect to Wifi
Instructions from STARTEC REGISTRO
If you saw "Write Successful," it means you've successfully installed the OS! To be able to access and type into your Raspberry Pi, we'll need to add a screen and a keyboard. If you ordered the LCD we have, you can follow the steps below: 1. Eject and...

Step 7:
Instructions from DIY RGB Tube Lights
Open the Button_Tube code in Arduino IDE.With this code you can change the color of the Tube Lights with the push of button. Install the Pushbutton library by clicking on sketch ->Include library -> Add zip library and select the Pushbutton-2.0 zip file...

2WD Voice Controlled Robot with Arduino
Instructions from 2WD Voice Controlled Robot with Arduino
Uploading the Code to the ArduinoIn this step you will have to upload the code below to the Arduino. You can also download the Arduino sketch from the link below the code. Remember that to send code to the Arduino you must set the switch on the Sparkfun...

How To Create An Interactive Music Player For Even
Instructions from How To Create An Interactive Music Player For Even
Tools:1. Circular Saw.2. Laser Cutter.3. Screwdriver.4. Screws. 5. 6 mm Female Female Copper Spacers ( To fix the Arduino Board).6. Nylon Cable Tie Belt.7. Stainless Steel Angle Brackets.Materials:1. Plywood sheets 3mm.2. Pine Wood. Electronics Components:1....

|<
<
1
2
3
4
5
>
>|